Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
L-Band Satellite Differential Correction Receiver Table A.3 lists the characteristics of the L-band satellite differential correction receiver with OmniSTAR support. Table A.3 L-Band satellite differential correction receiver with OmniSTAR support Item Description Bit error rate 10-5 for Eb/N of >5.5 dB Acquisition and reacquisition time <5 seconds, typical Frequency band 1525–1559 MHz Channel spacing 0.5 kHz AgGPS 252 Receiver User Guide 55 A Specifications A Specifications Table A.4 lists the receiver default settings. Table A.4 Receiver default settings Item Description DGPS source WAAS/EGNOS Dynamics Land Minimum elevation 8° AMU mask 3 PDOP mask 13 PDOP 2D/3D switch 11 DGPS mode Auto On/Off DGPS correction age limit 250 seconds Pos fix rate 1 Hz 56 AgGPS 252 Receiver User Guide APPENDIX B Third-Party Interface Requirements Third-Party Software Table B.1 lists the interface requirements for connecting an AgGPS receiver to third-party software. Use cable P/N 50166, or 30945 plus 50581, when connecting to the third-party software products listed. Table B.1 Third-party software interface requirements Software AgView FarmGPS Field Rover Company Protocol NMEA messages Baud Other Pos rate GIS Solutions NMEA VTG, GLL 4800 8-N-1 1Hz Red Hen NMEA GGA, GSA, VTG 4800 8-N-1 1Hz SST Dev Group NMEA GGA, GSA, GSV, VTG 4800 8-N-1 1Hz FieldLink DOS Agris NMEA GGA, GSA, VTG 4800 or 9600 8-N-1 1Hz FieldLink Windows Agris NMEA GGA, GSA, VTG 4800 or 9600 8-N-1 1Hz Field Worker Pro Field Worker NMEA GGA, GLL, RMC, VTG 4800 or 9600 8-N-1 1Hz AgGPS 252 Receiver User Guide 57 B Third-Party Interface Requirements B Third-Party Interface Requirements Software Company Protocol NMEA messages Baud Other Pos rate HGIS Starpal NMEA GGA, RMC 4800 or 9600 8-N-1 1Hz Instant Survey Agrilogic (Case-IH) NMEA GGA, GSA, RMC 4800 8-N-1 1Hz Pocket Survey Agrilogic (Case-IH) NMEA GGA, GSA, RMC 4800 8-N-1 1Hz Sitemate Farmworks NMEA GGA, VTG 4800 8-N-1 1Hz Third-Party Hardware Table B.2 lists the interface requirements for connecting an AgGPS receiver to third-party hardware. Table B.2 Third-party hardware interface requirements Hardware Company Protocol NMEA messages Baud Other Pos rate Cable P/N AMS Raven NMEA GGA, VTG 9600 8-N-1 1Hz Ag Navigator Springhill RTCM 9600 8-N-1 10Hz Aim Navigator Contour Case Tyler Position Inc. NMEA NMEA GGA GGA 19200 19200 8-N-1 8-N-1 5Hz 5Hz 50166, or 30945 plus 50581 Marker RDS or Position Inc. NMEA GGA 19200 8-N-1 5Hz Falcon Ag Chem NMEA GGA, VTG 4800 8-N-1 1Hz 58 AgGPS 252 Receiver User Guide Third-Party Interface Requirements B Third-Party Interface Requirements B Hardware Company Protocol NMEA messages Baud Other Pos rate Cable P/N Falcon w/ Falcon Track LBAR Ag Chem NMEA GGA, VTG 19200 8-N-1 10Hz Swath Smart or RGL 500 (LB-5 for Raven) Raven, Starlink manufactured NMEA GGA, VTG or RMC 19200 8-N-1 10hz 50166, or 30945 plus 50581 LB-3, LB-4, and LB-5 Starlink NMEA GGA, VTG or RMC 19200 8-N-1 10hz YM2000 Yield Monitor 1 Ag Leader NMEA GGA, VTG 4800 8-N-1 1 Hz 39903 plus 50581 PF3000 Yield Monitor 1 Ag Leader NMEA GGA, VTG 4800 8-N-1 1 Hz 39903 plus 50581 PF3000Pro Monitor without internal GPS 2 Ag Leader NMEA GGA, VTG 4800 8-N-1 1 Hz 39903 plus 50581 AFS Yield Monitor Case-IH (Ag Leader YM2000) NMEA GGA, VTG 4800 8-N-1 1 Hz 32609 plus 50581 AFS Yield Monitor Case-IH YMIU (yield monitor interface unit) manufactured by Ag Leader for Case-IH NMEA GGA, VTG 4800 8-N-1 1 Hz 32609 plus 50581 GreenStar Yield Monitor 3 John Deere NMEA GGA, GSA, RMC 4800 8-N-1 1 Hz 34189 plus 50581 New Holland Yield Monitor New Holland (Ag Leader PF3000) NMEA GGA, VTG 4800 8-N-1 1 Hz 39903 plus 50581 AgGPS 252 Receiver User Guide 59 B Third-Party Interface Requirements B Third-Party Interface Requirements Hardware Company Protocol NMEA messages Baud Other Pos rate Cable P/N VCD (Vision Display Controller) Rockwell NMEA GGA, GLL, VTG, ZDA 4800 8-N-1 1 Hz 50166, or 30945 plus 50581 Swath XL Midtech NMEA GGA 19200 8-N-1 5 Hz 50166, or 30945 plus 50581 Caterpillar Cebis Yield Monitor Claus NMEA GGA 4800 or 9600 8-N-1 1 Hz 50166, or 30945 plus 50581 AGCO FieIdStar Yield Monitor 4 AGCO NMEA GGA, VTG, GSV, GSA 4800 8-N-1 1 Hz 39903 plus 50581 1 P/N 39903 replaced old Ag Leader cable P/N 30660. 2 Connect to Aux port. 3 Older GreenStars with version 5.3P mapping processor software require 9600 baud. Older GreenStars with version 5.3R mapping processor software require 4800 baud. 4 AGCO unit requires a null modem RS-232 connection. Ag Leader cable P/N 39903 is wired correctly for connection. 60 AgGPS 252 Receiver User Guide Index Index s 1 PPS output 7 A accuracy 4, 10 adapter cable 21 AFS Yield Monitor 59 Ag Navigator 58 AGCO FieldStar Yield Monitor 60 AgGPS 170 Field Computer 4, 33 AgRemote utility 27 activating OmniSTAR 29 configuring ports 32 downloading 27 for RTK mode 31 Home screen 28 no GPS position 40 troubleshooting 44 viewing and configuring settings 1 WAAS/EGNOS 30 web document 28 AgView 57 Aim Navigator 58 altitude 13 AMS 58 antenna ...