Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
• PCM Only - Select this option only if the stereo system or amplifier cannot decode Dolby Digital signals. • Dolby Digital/PCM - Select this option only if the stereo system or amplifier can decode both Dolby Digital and Linear PCM signals. The audio output is also dependent on what is present in the program you are watching. The table below shows what type of output you will hear: Signal Present in Program Optical Output Setting Dolby Digital PCM Both Dolby Digital Only Dolby Digital PCM Dolby Digital PCM Only PCM (downmix) PCM PCM Dolby Digital/PCM Dolby Digital PCM Dolby Digital Chapter 10 Changing the Program Guide Order Note: When both audio signals are present in the program, the receiver defaults to Dolby Digital output unless you have selected PCM Only. Note: If you have selected Dolby Digital Only but there is only PCM audio in the program, you will hear nothing. This also applies to the analog audio outputs. 4 Select one of the following: • Line Mode. When you use this setting, in comparison to RF Mode, the dynamic range is wider, which makes the music and loud noises louder, but voices quieter. • RF Mode. When you use this setting, in comparison with Line Mode, the dynamic range is narrower, which makes music and loud noises quieter, but voices louder. 5 Select Done. CHANGING THE PROGRAM GUIDE ORDER You can set up the Program Guide to list channels in descending order, with the highest channel number at the top, or in ascending order, with the highest channel number at the bottom. Note: If you do not set a channel order, the Program Guide lists the channels in descending order. 1 Press MENU, select Preferences (8) , and then Channel Order ( 5) . 2 Select Ascending or Descending. 3 Select Done. Receiver Customization Changing the Guide Display CHANGING THE GUIDE DISPLAY The receiver comes set to display the Program Guide with video in the upper right corner. However, you can change the way the Program Guide displays. 1 Press MENU, select Preferences (8) , and then Guide Display ( 1). 2 Select one of the following options: • Standard - Partial Guide with Video. This option is preset when you first set up the receiver. The Program Guide displays video in the upper right corner and 1.5 hours of schedule per page. • Enhanced - Partial Guide with Video. Choose this option if you’d like larger text on your Program Guide. The Program Guide displays video in the upper right corner and one hour of schedule per page. • Extended - Partial Guide with Video. Choose this option if you’d like to see video in the upper right corner and three hours worth of schedule per page on the Program Guide. • Standard - Full Guide without Video. Choose this option if you’d like to see more channels per page on the Program Guide. • Enhanced - Full Guide without Video. Choose this option if you’d like to see more channels per page in large text on the Program Guide. • Extended - Full Guide without Video. Choose this option if you’d like to see more channels and three hours of schedule per page on the Program Guide. 3 Select Done. Chapter 10 Resetting to Factory Defaults RESETTING TO FACTORY DEFAULTS You can reset the receiver to discard any changes you have made to the receiver, except for remote control address settings and locks. Resetting the receiver to factory default settings also discards all Favorite Lists except the All Chan and All Sub lists. If you have set any locks on the receiver, and the receiver is locked, these locks will be kept. If the receiver is unlocked, your locks will be lost. You cannot reset the receiver to default settings to discard a password you have forgotten. No one but a Customer Service Representative can reset the receiver to bypass a receiver lock. 1 Press MENU, select System Setup ( 6) , and then Factory Defaults (5) . The receiver displays a Warning message to confirm that you want to reset the receiver’s preferences. 2 Select Yes. SCHEDULING RECEIVER UPDATES The receiver comes scheduled to update the Program Guide at 3:00 am every day. This section describes how to change the Updates settings. Note: This feature does not interfere with scheduled timers. Receiver Customization Receiver Customization Tips TIPS • To take full advantage of Dolby Digital 5.1 surround sound, you need an optical cable and a stereo that supports this feature. • Be sure to have the receiver connected to an active phone line and have Caller ID service from your phone company to use the Caller ID feature on this receiver. QUESTIONS • How can I see who has called me recently? Open your Caller ID History by pressing MENU, select System Setup (6) and then Caller ID History ( 3) on your remote control. • Why is my audio in another language? You may have selected an alternate language. See the instructions on page 61 to change your preferred language. • How can I change the channel order in the Program Guide? You can switch from ascending order ( lowest to highest) or descending order (highest to lowest) by following th...
Эта инструкция также подходит к моделям:Спутниковые ресиверы - DISH411 (11.9 mb)