Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
InstructionsAdditional Information 1 Turn the device on. 2 Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes. 3 For AUX mode only. Press 0 for a second TV, or 1 for a second VCR, or 2 for a tuner, or amplifier. Then press the STAR (*) button. 4 Press POWER. Use the device’s front panel buttons or its remote control. For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV will flash. This step is for programming which kind of device that should be programmed in AUX mode. If you’re not programming in AUX mode, skip to step 4. This puts your remote in the scan mode. 64 222.book Page 65 Tuesday, July 25, 2006 1:30 PM Remote Controls Controlling Other Components Instructions Additional Information 5 Press the UP or DOWN ARROW As you press the UP or DOWN ARROW, the repeatedly until the device turns off. remote tries each code in the memory to see if it can turn off your device. When the device turns off, you have found a code that might work. Note: The mode button for the device will flash rapidly eight times when you’ve scanned all the codes for that device. 6 Press POUND (#). The mode button flashes three times if you have entered the code correctly. This stores the code you found. 7 Turn the device back on and try some Try some other buttons to make sure they other buttons to make sure they work. work. Sometimes POWER works when other buttons don’t. If using Limited Mode, try VOLUME or MUTE. 8 If necessary, repeat this procedure until You may need to repeat the scan to find the you’ve tried all the codes. best code for your device. Checking the Device Codes You can find out what device code you’ve set for each remote control mode (TV, VCR, and AUX). Instructions Additional Information 1 Press and hold the appropriate mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes. 2 Press the Pound (#) button twice. Watch the mode light to determine your code. The mode button flashes the number for each digit of the device code, with a pause between the groups of flashes. A quick flash is for zero. For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV will flash. For example, if the code is 570, the mode button flashes five times, pauses, flashes seven times, pauses, and flashes once quickly. 65 222.book Page 66 Tuesday, July 25, 2006 1:30 PM Chapter 9 Controlling Other Components Instructions Additional Information For AUX mode: The first group of For example, if the TV code is 570, the AUX flashes tells you what the AUX mode mode button flashes once quickly (indicating 0 controls. A quick flash (zero) before the for TV), pauses, flashes five times, pauses, three-digit code is for a TV; one regular flashes seven times, pauses, and flashes once flash is for a VCR; and two flashes is quickly. for a tuner, or amplifier. For a satellite receiver programmed in For example, if the receiver address is 3, the AUX mode: The AUX mode button will AUX mode button flashes three times. flash the same number of times as the address number. For Limited Mode: If you have For example, if the TV code is 570, the AUX programmed a TV or VCR in Limited mode button flashes once quickly (indicating 0 Mode, the mode button flashes once at for TV), pauses, flashes five times, pauses, the end of the flash sequence. flashes seven times, pauses, flashes once quickly, and then flashes once (indicting Limited Mode). Controlling a Tuner/Amplifier Use the following remote control buttons to control a tuner or amplifier. When the remote control is set up as described on pages 61 and 67, press the AUX mode button to set the remote to AUX mode. The AUX mode button will stay lit for two seconds to show you’ve set the remote to AUX mode. Make sure to keep the remote in AUX mode to use the following buttons. 66 222.book Page 67 Tuesday, July 25, 2006 1:30 PM Remote Controls Controlling Other Components Switching Between TV and Device Volume Adjustment When the remote control is setup to operate your TV, the VOLUME and MUTE buttons adjust your TV volume. If you prefer the volume and mute functions of the remote to adjust the volume of a remote-controllable audio receiver or amplifier instead of the TV, this capability can be set up using the AUX mode of the remote control. To set the remote to control the device’s volume (steps 1-5 set up the remote and steps 6-7 make sure the remote works correctly): To set the remote back to control the TV volume (steps 1-5 set up the remote and steps 6-7 make sure the remote works correctly): Programming to Control a Second Satellite Receiver If you have another DISH Network satellite receiver installed, you can use this remote in AUX mode to control it along with your new receiver. When you program the remote to control this other receiver, the remote will send out IR and UHF (not UHF Pro) signals to the receiver....
Эта инструкция также подходит к моделям:Спутниковые ресиверы - VIP222 (1.89 mb)