Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
IMPORTANT SAFETY INSTRUCTIONS © 2007 Motorola, Inc. All rights reserved. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from Motorola, Inc. MOTOROLA and the Stylized M logo are registered in the US Patent and Trademark Office. All other product or service names are the property of their respective owners. Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or change. Motorola provides this guide without warranty of any kind, implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Motorola may make improvements or changes in the product(s) described in this manual at any time . DSR BASICS — SYMBOLS/ICONS Front Panel 207 317 505 530 ON/STANDBY. v v v v GO BACK To return to a previous menu or the last channel viewed. v v v OPTIONS To display the Main Menu. v v v NAVIGATION To navigate within menus or change channels up and down. v v v SELECT To select a highlighted menu option. v v v DSR BASICS — SYMBOLS/ICONS Back Panel 207 317 505 530 Back panel POWER cord connection. v v v v TELEPHONE LINE For Instant Pay-Per-View (IPPV) reportback and caller ID. v v v ANTENNA INPUT For analog off-air broadcast antenna or Cable TV. v v v DIGITAL VIDEO INTERFACE (DVI). v v CH3/4 SWITCH To set the RF output to channel 3 or 4. v v v v RF OUTPUT Modulated Channel 3/4 Output or Off-air Broadcast/Cable Pass-through Output v v v v DSR BASICS — SYMBOLS/ICONS Back Panel 207 317 505 530 USB PORTS (for future use) 1 1 1 2 COMPOSITE VIDEO OUTPUTS 1 2 2 2 Y Pb Pr COMPONENT VIDEO OUTPUT v v STEREO AUDIO OUTPUTS 1 2 2 2 OPTICAL DIGITAL AUDIO OUTPUT v v v S-VIDEO OUTPUT v v v DSR BASICS — SYMBOLS/ICONS Back Panel 207 317 505 530 UHF UHF REMOTE CONTROL ANTENNA PORT v v DIGITAL AUDIO OUTPUT (RCA/coax — electrical) v v v SATELLITE INPUT 1 1 1 2** **Note: The DSR530 is equipped with two satellite tuners. Each requires a separate satellite input connection to be able to watch one program while recording another program. CONNECTING YOUR DSR Make sure that the satellite receiver is not plugged into a power source before you connect any cables to the receiver. First connect the satellite input from your satellite dish to your receiver. There are several options to connect your DSR, and not every DSR model, TV, or other component includes all of the connection types described below. Review the appropriate manuals if necessary to determine the best connection for your system. Video: Use Composite video output (better), S-Video output (best for standard definition), Component video, or DVI outputs (best for high definition) to connect the DSR directly to your television, VCR, and home theater A/V receiver. Channel 3/4 RF modulator output to TV: If your TV is equipped with only one signal input connection (usually labeled Antenna/CATV input), connect the DSR’s modulated RF output to TV input to receive picture and sound with your TV tuned to either channel 3 or 4, depending on the channel 3/4 slide switch setting on the back of your DSR. Audio: The modulated RF output also provides audio along with video to televisions or VCRs (good). Utilize the stereo audio output (better) or the coaxial or optical Digital audio outputs (best) to connect the DSR directly to your television, VCR, and home theater A/V receiver. CONNECTING YOUR DSR Modem: Connect the telephone jack to a home telephone jack for Instant Pay-Per-View (IPPV) reportback and Caller ID. Star Choice will not permit IPPV unless this remains connected. Ant In: If applicable, connect the external antenna input for local off-air or cable TV broadcast. The DSR will pass-through this RF source to the RF Output Connection when the DSR is in standby mode. Once the above connections are secure, plug the DSR power cord or separate power supply (in the case of the DSR207) into a standard power outlet. Wait one minute, and then press the ON button located on the satellite receiver’s front panel. Notes: Video and audio quality should be best when you connect the DSR directly to your TV/monitor/projector and an ...
Эта инструкция также подходит к моделям:Спутниковые ресиверы - DSR505 (443.23 kb)
Спутниковые ресиверы - DSR530 (443.23 kb)