Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
To connect the audio connections for your HDTV, proceed to the following page. To connect your audio connections for an A/V receiver, go to Connecting Your DCH Receiver to an A/V Receiver— Audio. Note: Be sure to match up each signal to the same connection on the TV, otherwise the colors will not appear correctly on your TV. HDMI If your TV has an HDMI input, this is for both audio and video if you are using the TV speakers. Connect an HDMI cable to the TV and to the HDMI connector on your DCH receiver. If your TV has a DVI input, use the DVI connection for your video: • Connect a DVI-to-HDMI adapter or cable to the HDMI out connector on the DCH receiver and the DVI-HDTV connector on your TV. A DVI connection supports only the video connection between the DCH receiver and the HDTV. To connect the audio connections for your HDTV, proceed to the following page. To connect your audio connections for an A/V receiver, go to Connecting Your DCH Receiver to an A/V Receiver — Audio. If you have an audio/video receiver and are not using your TV’s speakers, go to Connecting Your DCH Receiver to an A/V Receiver — Audio. DVI does not provide audio. A separate audio connection must be made. IEEE-1394 If your HDTV has an IEEE-1394 connector, you can use the IEEE-1394 for both your video and audio connection: • Connect an IEEE-1394 cable to the IEEE-1394 connector on your HDTV and DCH receiver. On-screen graphics will not be displayed when you are using the IEEE-1394 connection on the rear panel of the DCH receiver. If you have an audio/video receiver and are not using your TV’s speakers, go to Connecting Your DCH Receiver to an A/V Receiver — Audio. Connecting Your DCH Receiver to an HDTV — Audio Note: Only (1) HDTV video connection needs to be made to an HDTV. Connecting HDTV — Audio Note: These connections are not required if you are using your TV’s speakers and HDMI or IEEE-1394 connections. If your TV does not have digital audio inputs: • Connect the stereo audio cable to the AUDIO L and R connectors on the DCH6416 receiver and the AUDIO LEFT and AUDIO RIGHT connectors on the HDTV. If your TV supports a digital audio input: • If your equipment supports it, use the digital audio OPTICAL S/PDIF or COAXIAL S/PDIF outputs instead of the AUDIO L and R outputs. In most cases, S/PDIF offers better audio quality, including support for Dolby® Digital 5.1 audio. For information on configuring your DCH receiver settings, see Optimizing Your DCH Receiver for High-Definition TV. Connecting Your DCH Receiver to an A/V Receiver — Audio Note: Only (1) HDTV video connection needs to be made to an HDTV. Connecting an A/V Receiver — Audio There are three options available for audio connections to your A/V receiver: • Digital audio (OPTICAL S/PDIF) • Digital audio (COAXIAL S/PDIF) • Stereo audio (AUDIO L AND R) • HDMI If your A/V receiver supports it, the optical (OPTICAL S/PDIF), coaxial (S/PDIF), or HDMI audio outputs may be used in place of the stereo audio outputs (AUDIO L and R). In most cases, these outputs offer a higher level of audio quality, including support for Dolby Digital 5.1 audio. • Digital audio optical (S/PDIF) — Connect the optical cable to the digital audio OPTICAL connector on the DCH receiver and the OPTICAL connector on the A/V receiver. • Digital audio coaxial (S/PDIF) — Connect the digital audio cable to the digital audio connector on the DCH receiver and the DIGITAL INPUT COAX connector on the A/V receiver. • Stereo audio – Connect the stereo audio cable to the AUDIO L and R connectors on the DCH receiver and the AUDIO LEFT and AUDIO RIGHT connectors on the A/V receiver. • HDMI – Connect an HDMI cable to your A/V receiver and to the HDMI connector on your DCH receiver. For information on configuring your DCH receiver settings, see Optimizing Your DCH Receiver for High-Definition TV. Connecting Your DCH Receiver to a Stereo TV (SDTV) Depending on the TV’s inputs: 1. If possible, use the S-Video and audio connectors on the DCH receiver. 2. If the TV has no S-Video input, use the composite video and audio connectors on the DCH receiver. 3. If the TV has an RF input only, use the RF out connector on the DCH receiver. The RF connection carries video and audio. Connecting a Stereo TV (SDTV) 1. Connect the stereo audio cable to the AUDIO L and R connectors on the DCH receiver and the AUDIO LEFT and AUDIO RIGHT connectors on the Stereo TV (SDTV). 2. Connect a video cable to the VIDEO OUT connector on the DCH receiver and the INPUT VIDEO on the TV or an S-video cable to the S-VIDEO connectors on the DCH receiver and the TV. These video connection methods do not support HD video. If you have an HDTV, see Connecting your DCH Receiver to an HDTV — Video Only on page . 19 Connecting Your DCH Receiver to a Stereo TV (SDTV) and Stereo VCR Connecting a Stereo TV (SDTV) and Stereo VCR 1. Connect a stereo audio cable to the AUDIO OUT L and R connectors on the DCH6416 receiver and the INPUT AUDIO L and R connectors on the stereo...