Оценок - 3, средний балл: 4.7 ( )

Производитель: Humax Размер: 2.38 mb Название файла: oak%20series(10gb).pdf Язык инструкции:

Note: The scroll bar on left of the screen shows the location of the cursor in the Satellite. The scroll bar on right side of the screen shows the location of the selected Satellite service. • Specifications are for NACI-5700 models. E18 Guide of Main Menu 2. TV Guide You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the TV/Radio( )button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide mode includes four different modes. To select each mode, use the following buttons: • RED ( )button : Use to display the current and next programme list. • GREEN ( )button : Use to display the programme list for one-week. • YELLOW( )button : Use to display the reserved programme list. • BLUE ( )button : Use to display the simple TV Guide list. (Quick mode) Now/Next mode Show the informations of the programmes that are played now or will be played next time. This mode consists of the service name, event name, event duration time, current time and on-screen-display window. To watch a programme you want through the display window: • Use the buttons to select a programme you want. The selected service will appear on the right display window. • Use the buttons to select a programme you want. And then press the OK button on the remote control unit. The selected service will appear on the right display window. The selected OSD will be highlighted every time the cursor moves. To reserve a programme you want: • Select a programme you want by using the buttons or buttons. And then press the WHITE( )button. Press the buttons to watch the programme of previous page or the programme of next page. Press the YELLOW( )button to watch the Reserved programme list. E19 Weekly mode Shows the information of programmes that will be played for a week. To watch a programme you want through the display window: • Press the OK button and then press the buttons to select a programme you want. Press the OK button again. To reserve or cancel programme reservation: • Select a day you want using the buttons. Press the buttons to select a programme you want and then press the WHITE( )button. Reserved mode Shows the programme lists that you have already reserved on the TV Guide or Information box. Maximum eight programmes can be reserved. This programme list includes service name, date, duration time, reservation mode and event name. To cancel the Reserved service, select a programme you want to cancel using the buttons and then press the WHITE( )button. Quick mode Shows a simple TV Guide like an Information box. This mode shows in the A/V playback mode. • Red vertical line : Indicates the current time. • Black/white bar : Shows the proceeding state of programme. • Time range of bar : This consists of three blocks by 30 minutes per block. E20 Guide of Main Menu 3. Parental Control You can set a parental guidance rating to each programme in this mode. 1. When the OK button is pressed after selecting the highlighted parental control on the initial menu screen, a display window for entering the PIN code will appear on the centre of screen. ** The default PIN code is . 2. Enter the PIN code on the display window. 0000 (If any problem occurs when entering a PIN code, you cannot switch to the next mode.) 3. Set the parental guidance rating of highlighted censorship classification. The parental level is given as age-based numbers : no block, 6, 10, 14, 18 and total block. Enter the PIN code to unlock or lock programmes. 4. To change your PIN code: • Select the highlighted Old PIN code using the buttons and then enter your Old PIN code. • Enter a New PIN code in the highlighted New PIN code using the buttons. • To verify the New PIN code, re-enter a New PIN code in the highlighted Verify Changed PIN code. 5. When the entered PIN code is correct, then all settings are completed. (If the PIN code is wrong, the message “PIN code mismatch” will be displayed on the display window. When the OK button is pressed at this time, the Old PIN code is valid and the cursor is located in the first position of this menu.) E21 4. Installation This mode allows you to customise, add a new service and displays the state of the STB. Enter the submenus after selecting the Installation mode in the Main Menu. 4-1. System Setting The System Setting mode supports the STB internal settings according to the connection of the receiver and external units. This mode includes Language Setting, Time Setting, A/V Output Setting, UHF Tuning and Other Settings. Language Setting Select the language for menu, audio or subtitle. 1. Select the highlighted language setting using the buttons in the system setting mode and then press the OK button. 2. Select the highlighted Menu(or Audio, Subtitle) Language and press the buttons and the language list will be displayed. 3. Use the buttons to move t...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: