Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
If it is correct, the Parental Settings Menu including following items is displayed: There you can set/reset locking for the Main Menu, or the Installation Menu to restrict access. If the menu lock is disabled, there will be free access to the menu system. You can change the lock key. Maturity Lock: use [UP] or [DOWN] buttons to go to Maturity Lock option. Use [LEFT] or [RIGHT] buttons to toggle Maturity Lock Mode. When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, does not show video-audio. Menu Lock: use [UP] or [DOWN] buttons to go to Lock Menu option. Use [LEFT] or [RIGHT]buttons to toggle Menu Lock Mode. OFF:All menus are unlocked. MAIN MENU: Main Menu is accessible only with the correct lock key.So the user can’t add, delete, rename, channels, can’t set timers. INSTALLATION: Installation menu is locked.So the user can’t add channels. Changes will be updated after exiting ‘Configuration Menu’. Set Lock Key: use [UP] or [DOWN] buttons to go to Set Lock Key option. Use OK button to enter new password. New Password Menu is displayed. Use NUMERIC buttons to enter new password. New Password is asked twice for confirmation. If both passwords are four digits long and the same, the password is changed. It is updated after exiting the Parental Menu. Enter PIN CODE:use [UP] or [DOWN] buttons to go to Enter PIN code option. Use OK button to enter new password. New Password Menu is displayed. Use NUMBER buttons to enter new password. New Password is asked twice for confirmation. ANTENNA POWER Use [UP] or [DOWN] buttons to go to Antenna Power Supply Setting. The setting will be OFF as default. If you want connect the receiver to an active antenna that is an instrument amplifying the received signal then you must change the Antenna Power Supply setting to ON. The DVB-T receiver can supply 30mA (5V active antenna output). Please do not use a normal passive antenna (do not short circuit the ANT IN connector) while Antenna Power Supply setting is ON. This may cause breakdown in your DVB-T receiver. EDITING THE CHANNEL LIST The digital terrestrial television channels found by the receiver when first installed are storedin its memory as a channel list. This list can be altered and amended to remove unwanted channels and to suit your own preferences. First bring up the Main Menu with the [MENU] key on the remote control handset. Then, using the [UP] or [DOWN] keys on the remote control, choose the Edit PR list and press the [OK] key, to display the Channel List. The Channel List screen displays the list of channels in the receiver's memory, with a quarter- screen image window showing the selected channel, and can be used to change channels for viewing, delete channels from the memory, edit the name of the channel as it appears in the list and on-screen, lock a channel against viewing by younger members of the family, and set up favourite channels.Channel List functions are carried out on one channel at a time. The channel to be affected is first highlighted in the list using the [UP] or [DOWN] keys. -13 SELECT This function selects a channel for viewing and is an alternative to using the [P+] and [P-] keys, channel number or EPG. Highlight the channel to be viewed using the [LEFT] or [RIGHT] keys and press [OK]. The highlighted channel now appears in the image window and you can leave the Channel List to view the channel by pressing [MENU]. DELETE The initial installation of the DVB -T receiver can produce duplicate entries in the channel list from transmitters operating at different frequencies in adjacent areas, and you may wish to delete these duplicate entries from the list. In addition, other channels which you do not want in the list.Highlight the channel to be deleted, highlight the DELETE button at the base of the screen using the [LEFT] or [RIGHT] keys, and press [OK]. The highlighted channel is deleted from the list. You can now perform further editing on the channel list, or return to normal broadcast viewing by pressing the [MENU] key. EDIT NAME The channel names which appear in the channel list and the information banner are assigned by the broadcasters and some longer names are abbreviated to become unrecognisable. You can edit the names to suit your preferences with the Edit Name function. Highlight the channel to be renamed, highlight the EDIT NAME button at the base of the screen using the [LEFT] or [RIGHT] keys, and press [OK]. The highlighted channel name appears on the right of the screen with the first character highlighted by a cursor. Any of the 15 characters that make up a channel name can be highlighted using the [LEFT] or [RIGHT] keys and the highlighted character changed by pressing the [UP] or [DOWN] keys to cycle through the alphabet, numbers and other characters available. When the required changes have been made, pressing [OK] stores the new name and returns to the Channel List screen. Alternatively, pressing [MENU] will abandon the...
Эта инструкция также подходит к моделям:Спутниковые ресиверы - TU-DB1SFR (492.11 kb)