Оценок - , средний балл:
(
)
)
Производитель: ZTE
Размер: 2.12 mb
Название файла:
Язык инструкции:
Документ загружается, подождите пожалуйста
 |
Документ загружается, подождите пожалуйста
Фрагмент инструкции
Connect your travel adapter to the bottom of your mobile phone as shown in the diagram. 2. Connect the other end of the travel adapter to the mains socket. 3. When you charge the battery, the battery charging indicator appears. Insert battery is charged. Hold the End/Power key to power on/off the phone. The phone will automatically search for the network. In the standby mode, hold the * key to turn on or off the torch. The torch is on the top of the phone. Problem Possible causes Possible solution Poor reception The network signal is too weak at your current location, for example, in a basement or near a tall building, because wireless transmissions can not effectively reach it. Move to a location where the network signal can be properly received. The network is busy at the current time (for example, during peak times, there may be too much network traffic to handle additional calls). Avoid using the phone at such times, or try again after waiting a short time. You are too far away from a base station for your service provider. You can request a service area map from your service provider. Echo or noise Poor network trunk quality on the part of your service provider. Press End key and dial again. You may be switched to a better-quality network trunk or phone line. Poor local telephone line quality. Press End key and dial again. You may be switched to a better- quality network trunk or phone line. Unable to select certain features Your service provider does not support these features, or you have not Contact your service provider. Battery not charge The battery or battery charger is damaged. Contact the dealer. The phone’s temperature is below 0°C or higher than 45°C. Adjust the battery charging environment to avoid extremes of temperature. - 20 -- 22 Writing Text• Change input mode: Press the # key to change the input mode (input modes: Abc, 123, ABC, abc). • Input letters: In Abc/ABC/abc mode, constantly press the corresponding letter key till the letter appears. • Input digits: In 123 mode, press digit key once to input a digit. In Abc/ ABC/abc mode, constantly press the digit key until the number appears. • Input symbol: Press the * key to enter the symbol mode, select the required symbol (common symbols) by pressing the Navigation keys and then press the Left soft key or Center key to confirm it. In Abc/ ABC/abc mode, constantly press the 1 key until the required symbol (common symbols) appears. • Input space: Press the 0 key to input space. It does not work in 123 mode. • Delete character: Press the Right soft key to clear a character. Hold the Right soft key to delete all characters and clear the display. • Move cursor to left or right: Among the text, press the Left/Right Navigation keys to move the cursor to left or right. How to Add People to the PhonebookThere are some numbers that you may want to call again and again, so it makes sense to add these numbers to your Phonebook. You can then access these numbers quickly and easily....