Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
7.6 Engage the Meeting Profile with a single key press • Mute the handset and switch it to vibrate mode by holding # Key from the Idle Screen: • Hold # Key to engage and disengage Meeting Mode • The vibrate icon and mute symbol will be displayed on the Information Bar. 7.7 Switch the Keytones off Menu > Settings > Profiles > Edit • Scroll down to Keytones and select Off. 7.8 Change the Backlight Duration Menu > Settings > Screen > Set backlight duration • Screen full-light is the main screen lighting. After the set time the screen goes to half light. • For screen half-light, the screen is partially lit for the specified time. 47 7.9 Change the Display Brightness Menu > Settings > Screen > Set brightness • Use the Up/Down Key to set the desired brightness level. 7.10 Add a Greeting and Owner name Menu > Settings > Screen >Owner name Menu > Settings > Screen >Greeting • The Owner name is permanently displayed on the idle screen. • The Greeting is displayed during the start up sequence. 7.11 Set the Keyboard light Menu > Settings > Screen > Keyboard light The time that the keys remain illuminated for after the Duration last key press Select Always on, and the keypad backlight is enabled Period for the set Duration; select Customize and the keypad is only illuminated between the times set below. Keypad backlighting is unnecessary during the day so a cus tomised setting will improve battery life 7.12 What is the PIN Code? Menu > Settings > Security > Activate security codes > PIN code • The PIN code is stored on the USIM card and protects your account against unwanted use. 48 • Select On or Off and enter the PIN number to confirm. The original PIN number is provided by your service provider but can be changed if required. • To change the PIN Code select Change security codes > PIN code. • If you forget the PIN code, it can be supplied by your service provider. 7.13 What is the Handset Code? Menu > Settings > Security > Activate security codes > Handset code • The handset code is stored on the handset and protects against unwanted use. If the handset is lost or stolen it cannot be switched on without the handset code. This provides a greater level of protection than the PIN code which protects the USIM card only. • The default code is 0000. • Select On or Off and enter the handset lock code, 0000. • To change the Handset code select Change security codes > Handset code and enter a new code of your choice. • It is important to remember this code as it can only be reset by the repair center for a fee. 7.14 Additional notes on PIN Codes • The PIN and PUK Codes are provided by your Service Provider. 49 • If you enter the PIN number incorrectly three times the phone will be locked. • Contact your service provider to get the PIN Unlocking Key (PUK code). • PIN2 Code is an additional PIN on the USIM card and is not generally supported. 7.15 Fixed Dial Numbers, FDN List Menu > Settin...