Войти:
Оценок - 0, средний балл: 0 ( )

Инструкция по эксплуатации ZTE, модель F116(ZTE(Malaysia)SDN BHD)

Производитель: ZTE
Размер: 3.56 mb
Название файла:
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


The user therefore is held to respect legislation in confidentiality matter and remains the only responsible subject in case of eventual violations of the enforced norm. Copyright Notice The video/audio recordings you make/download are protected by copyright laws. They are for personal use only and must not be otherwise used without the permission of the copyright owner. Getting Started Your F116 Series The F116 described in this manual is approved for use on the UMTS/ GSM/GPRS networks and achieves seamless handover between them. When using this device, obey all laws, respect the privacy and legitimate rights of others, including copyrights. Technical Parameters Type F116 Dimensions 110mm.47.5mm.11.8mm Display 2.0 inches 176*220 TFT Weight 70g (Including a standard battery) Battery 820 mAh Li-ion battery Continuous standby time GSM: 200 hours; WCDMA: 330 hours Continuous talk time GSM: 400 minutes; WCDMA: 240 minutes Continuous video talk time 135 minutes * The phone’s talk and standby times are based on ideal working environments. The use of extended backlight, browser, and network conditions can reduce battery life and talk/standby time. Starting Up How to install the (U)SIM card and battery 1. Make sure that the phone is powered off and the charger is disconnected from the phone. 2. Turn the phone over, hook the edge of the back cover and lift it up to remove the back cover. 3. If the battery is already inside, remove it. 4. Hold your (U)SIM card with the cut corner oriented as shown above the (U)SIM card slot and then slide it into the slot. 5. Insert the battery by aligning the gold contacts on the battery with the gold contacts in the battery compartment on the phone. 6. Replace the back cover. How to insert the memory Card Your phone supports microSD cards with capacity up to 4 GB, giving you a very large memory capacity to save images, photos, audio and video files. Notes: The microSD logo is a trademark of SD Card Association. 1. Remove the back cover. 2. Slip the memory card carefully into the microSD card slot with the metal contacts facing downwards. To remove the card, carefully slide it out of the slot. How to charge the battery The lithium ion rechargeable battery of the mobile phone can be immediately used after unpacking. A new battery performs best after performing a full charge/discharge 3 times. When not using the battery for a long period, remove it from the phone and store it in a cool dry place. Caution: Do not charge the battery out of the temperature range of 0°C to 45°C. 1. Connect your adapter to the right side of your mobile phone as shown in the picture. 2. Connect the other end of the adapter to the mains socket. Powering On/Off 1. Make sure that your SIM card is inserted and the battery is charged. 2. Hold End/Power Key for about 2 seconds to power on/off the phone. The phone...


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории