Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The user should refer to the enclosed warranty card for full warranty and service information. Note: The pictures and icons shown in the manual are just schematic drawings for function demonstration. If they are inconsistent with your handset, please take your handset as the standard. If the inconsistency exits in the manual because of the handset function updating, please refer to the follow-up public information from ZTE CORPORATION. 16 Key Functions Headset jack Earpiece Charger interface 4-Way Navigation keys Torch Left/Right soft key and Center key Send key End/Power key Alpha numeric keys * key # key 17 Function Description Left soft key Performs the function indicated at the left bottom of the screen. Right soft key Performs the function indicated at the right bottom of the screen. Center key Press to confirm actions and make selections. 4-Way Navigation keys These keys (UP, DOWN, LEFT and RIGHT) allow for navigation through menu options and quick access to some function menus. Send key Press to dial a phone number or answer a call, or view the call history. End/Power key Press to exit to the standby mode. Hold to switch on/off the phone. Alpha numeric keys Press to enter characters 0-9 and the alphabets from a-z. 18 Note: In this User Manual, “press a key” means to press the key and release it, while “hold a key” means to press the key for at least two seconds and then release it. Locking and Unlocking the Keypad In the standby mode, press the Left soft key and then press the * key within two seconds to lock the keypad. The unlock method is the same. Locking the keypad can prevent unintentional operations on it. You can answer an incoming call with the regular operation when the keypad is locked. Interface icons Signal strength New SMS, message full when blinking Keypad locked New MMS GPRS Silent 19 Battery status General Alarm clock set Headset Outdoor Meeting Missed call Call diverting Battery The lithium ion battery of the mobile phone can be immediately used after unpacking. Installing the battery 1. Pull the battery cover downward and remove it. 2. Insert the battery by aligning the metal contacts with the contacts in the battery slot. 3. Push down the upper section of the battery until it clicks into place. 4. Replace the battery cover and close it gently until you hear a click. 20 Remove the battery cover Push down the battery Replace the battery cover Removing the battery 1. Make sure that your mobile phone is switched off. 2. Remove the battery cover. 3. Pull the battery up and remove it from the mobile phone. Remove the battery cover Pull up the battery from here 21 Inserting the SIM card Insert the SIM card as follows: 1. Make sure that the phone is switched off and the charger is disconnected from the phone. 2. Turn the phone over and remove the battery cover. 3. Remove the battery if it is already installed. 4. Hold your SIM card with the cut c...