Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The microSD card is optional and can be installed and removed while the phone is turned on. Unmount the microSD card before removing it. 1. Place your finger in the slot of the back cover to lift and remove the cover. 2. Hold the SIM card with its cut corner oriented as shown and slip it into the card holder. 3. Hold your microSD card with the metal contacts facing down and slide it into the microSD card slot. . Align the connectors on the phone and the battery and slide the battery into the compartment. Then gently press the battery down until it is secured. 5. Press the cover gently back into place until you hear a click. Charging the battery 1. Connect the adapter to the charging jack. Ensure that the adapter is inserted with the correct orientation. Do not force the connector into the charging jack. . Connect the charger to a standard AC power outlet. 3. Disconnect the charger when the battery is fully charged. Powering your phone on/off Powering your phone on/off Make sure the battery is charged before powering on. • Press and hold the Power Key to turn on your phone. • To turn it off, press and hold the Power Key to open the options menu. Touch Power off > OK. Declaration of RoHS compliance To minimise the environmental impact and take more responsibility for the earth we live on, this document shall serve as a formal declaration that the ZTE Blade Q manufactured by ZTE CORPORATION is in compliance with Directive 2011/65/EU of the European Parliament - RoHS (Restriction of Hazardous Substances) with respect to the following substances: 1. Lead (Pb) 2. Mercury (Hg) 3. Cadmium (Cd) 4. Hexavalent Chromium (Cr (VI)) 5. Polybrominated biphenyls (PBBs) 6. Polybrominated diphenyl ethers (PBDEs) The ZTE Blade Q manufactured by ZTE CORPORATION meets the requirements of EU Directive 0 / 5/EU. 0 Disposal of your old appliance . When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by European Directive 0 / /EU. . All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or local authorities. . The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. For recycling information for this product based on the WEEE directive, please send an email to weee@zte.com.cn SAR SAR Your mobile device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves recommended by international guidelines. These guidelines were developed by the independent scientific organisation ICNIRP and include safety margins designed to ensure the protection of all persons, regardless of age and health. The guidelines use a unit of measurement known as Specific Absorption Rate, or SAR. The SAR limit for mobile devices is W/kg and the highest SAR value for this device when tested was 1.357 W/...