Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
When you have selected GPRS as a data bearer, the phone uses EDGE instead of GPRS if this is available in the network. You cannot choose between EDGE and GPRS, but for some applications, such as browsing mobile Internet pages, you may be able to select either GPRS or CSD. DEFINE GPRS CONNECTION Depending on your service, you may be able to define when the phone connects to the GPRS or EDGE network. From the menus, select Settings > Connectivity > GPRS > GPRS Connection and one of the following: When needed—The phone registers and connects to the GPRS or EDGE network only if you use a function that needs the GPRS service. Establishing a connection may take longer than when Always online is selected. Always online—The phone automatically registers to a GPRS or EDGE network when you switch the phone on, if the network is available in your location. GPRS MODEM SETTINGS When you use your Nokia phone as a wireless modem, you can enable GPRS connectivity from your PC or laptop computer. Before you can use GPRS technology, you must save the GPRS settings for each of the applications used over GPRS. Some service providers may have already set up information for your GPRS dial-up connection. In order to use GPRS, you must first subscribe to the network service. Contact your service provider for details. 1 From the menus, select Settings > Connectivity > GPRS > GPRS modem settings > Active access point and the access point that you want to activate. 2 Select Edit active access point > Alias for access point, enter the name for the access point, and select OK. 3 Select GPRS access point, enter the access point name to establish a connection to a GPRS network, and select OK. You can also set the GPRS dial-up service settings (access point name) on your PC using the Nokia Modem Options software. See the Nokia PC Suite online help for more information. If you set the settings on both the phone and the PC, the PC settings will be used. GPRS ICONS The following icons appear in the upper left corner of the screen to show you the status of your GPRS connection. Indicates an active GPRS connection, for example, when you are using the browser. Indicates that the GPRS connection has been interrupted by a voice call or text message. Data communication applications For information on using a data communication application, refer to the documentation provided with the application. If you use an IR connection, activate the IR connection in your phone by selecting Settings > Connectivity > Infrared from the menus. Also, make sure that the connection is active in your PC. For better performance during an IR connection, place the phone on a stationary surface. Do not move the phone while the IR connection is active. If you use the DKU-2 data cable: 1 Connect the cable to the USB port on your computer and to the Pop-Port™ connector on your phone. 2 Start using the data communications application on the computer. Note: Making or answering phone calls during a computer connection is not recommended as it might disrupt the operation. • CALL SETTINGS Automatic volume control Automatic volume control automatically adjusts the phone earpiece volume according to the noise level in your environment and the volume of the speaker on the other end of the call. For example, if you are in a noisy environment, the volume is increased. If the person to whom you are speaking is speaking loudly, the volume is decreased. Automatic volume control is not available if you are using a headset or other accessory. FROM THE MENU 1 From the menus, select Settings > Call settings > Automatic volume control. 2 Select On to activate or Off to deactivate. The default setting is Off. DURING A CALL Note: Setting automatic volume control during an active call affects only the current call. 1 During a call, select Options. 2 Select Auto volume on to activate or Auto volume off to deactivate. If you change the volume during an active call by pressing the Volume up or Volume down key, the phone volume level changes regardless of whether or not automatic volume control is activated. When you end the call, the volume returns to the level set before automatic volume control was activated. Call forwarding Call forwarding tells your network to redirect incoming calls to another number. Call forwarding is a network service and may not work the same in all networks. Contact your service provider for more information. ACTIVATE CALL FORWARDING 1 From the menus, select Settings > Call settings > Call forwarding and one of the following: Forward all voice calls—Forward all calls to the number you specify. Forward if busy—Forward all calls when you are in a call. Forward if not answered—Forward all calls to another number if you do not answer. You can also set a delay before forwarding takes place. Forward if out of reach—Forward all calls when your phone is turned off or out of the coverage area. Forward if not available—Forward all calls when you do not answer, your phone is busy o...