Оценок - 1, средний балл: 3
(
)
)
|
Фрагмент инструкции
1. In the standby mode, select Menu > Settings > Call > Calling card. 2. Enter your security code, and select OK. See "Security," p. 56. 3. Scroll to the calling card of your choice, and select it. Make card calls After you have selected a calling card, make a card call. 1. Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions. 2. Press and hold the send key for a few seconds until Card call is displayed. 3. Follow the instructions on the screen. 4. When you hear the tone or system message, select OK. Data or fax calls Data and fax calling is a network service. See "Network services," p. 5. If your network operator supports this feature, you can set up the device to send or receive data and fax calls with a terminal, such as a PDA or PC, connected. For better performance during data calls, place the device on a stationary surface. Do not move the device or hold it in your hand during a data call. For more information on connectivity, refer to the PC/PDA Connectivity Guide which can be downloaded from the Nokia website at 1. In the standby mode, select Menu > Settings > Call > Data/fax calls > Rcvd. data/fax call and one of the following options: Normal—The device receives incoming calls as usual. Data calls only—The device receives only data calls. Fax calls only—The device receives only fax calls. 2. When finished with receiving the fax or data call, repeat steps 1 and 2, and select Normal. Data transfer To view the transmission speed when sending or receiving data and fax calls. In the standby mode, select Menu > Settings > Call > Data/fax calls > Data rate display > Graphic or Off. Call summary Your device can display the time spent on a call when you hang up. In the standby mode, select Menu > Settings > Call > Call summary > On or Off. Show call time To see the call time on the display screen after each call, select Menu > Settings > Call > Show call time displ. > On or Off. Ringing tone for no caller ID You can select a different ringing tone for calls received with no caller ID. In the standby mode, select Menu > Settings > Call > Ringtone no caller ID > On or Off. ¦ Phone settings Language settings The phone language affects the time and date formats of the clock, and alarm clock. In the standby mode, select Menu > Settings > Phone > Phone language and the language of your choice. Automatic keyguard You can set the keypad of your device to lock automatically after a preset time delay. 1. In the standby mode, select Menu > Settings > Phone > Automatic keyguard > On or Off. 2. If you select On, Set delay: is displayed. 3. Enter the delay time (in mm:ss format), and select OK. When keyguard is on, it may be possible to dial the emergency number programmed into your device. Navigation key If supported by your wireless service provider, you can set the features that are activated when you press the scroll key. 1. In the standby mode, select Menu > Settings > Phone > Navigation key. 2. Highlight the scroll up, scroll down, scroll right, or scroll left arrow; select Change. 3. Select a function to assign to the action. Memory status You can view the size of memory available on your device. In the standby mode, select Menu > Settings > Phone > Memory status. You can view the size of memory available for application installations. In the standby mode, select Menu > Settings > Phone > Memory status. Touch tones Touch tones, are the tones that sound when you press the keys on your device keypad. You can use touch tones for many automated dial-up services such as banking and airlines or for entering your voice mailbox number and password. Touch tones are sent during an active call. You can send them manually from your device keypad, or send them automatically by saving them in your device. Set type In the standby mode, select Menu > Settings > Phone > Touch tones > Manual touch tones and one of the following options: Continuous—Used to set the tone sound for as long as you press and hold a key. Fixed—Used to send tones of the duration you specify in the Touch tone length option. Off—Used to turn off tones. No tones are sent when you press a key. Set length You can specify touch-tone length for the Fixed option. In the standby mode, select Menu > Settings > Phone > Touch tones > Touch tone length > Short (95 ms) or Long (350 ms). Start-up tone You can select to have a start-up tone when you first turn on your device. In the standby mode, select Menu > Settings > Phone > Start-up tone > On or Off. Help text activation Your device displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 14 seconds, and wait for the help text to be displayed. If necessary, use the scroll key to page through the full help text. The default setting for help text is On. However, you can turn help text on or off. In the standby mode, select Menu > Set...