Оценок - 2, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
If the connection to the manually selected network is lost, the phone will sound an error tone and ask you to select a network again. The selected network must have a roaming agreement with your home network, that is, the operator whose SIM card is in your phone. The phone will let you select another network if the phone fails to access the selected network. If you switch off the phone, the phone will be reset to Automatic. 54 C3310 User Guide Settings [Menu 3] Settings [Menu 3] Preferred [Menu 3-6-3] You can set a list of preferred networks the handset should attempt to register with first, before attempting to register to any other networks. This list is created from the handset’s predefined list of known networks. GPRS setting [Menu 3-7] GPRS(General Packet Radio Service) is a technology that allows mobile phones to be used for sending and receiving data over the mobile network. GPRS is a data bearer that enables wireless access to data network such as the Internet. Before you can use GPRS technology • You need to subscribe to the GPRS service. For availability and subscription to GPRS service, contact your network operator or service provider. •You need to save the GPRS settings for the applications used over GPRS. If you select Power on and you are in a network that supports GPRS, the phone registers to the GPRS network and sending short messages will be done via GPRS. Also, starting an active packet data connection, for example, to send and receive e-mail, is quicker. If you select When needed, the phone will use a GPRS connection only if you start an application or action that needs it. The GPRS connection is closed after it is no longer required by any application. n Note If there is no GPRS coverage and you have chosen Automatic, the phone will periodically try to establish a connection. C3310 User Guide 55 Settings [Menu 3] Settings [Menu 3] Reset settings [Menu 3-8] You can reset your phone to its default configuration. To do so, proceed, as follows. 1. Select the Reset settings menu option. 2. Enter the 4-digit security code. n Note The security code is preset to 0000. 56 C3310 User Guide Camera [Menu 4] The C3310 has a built-in camera. It supports Zoom, Colour/Grey settings, and Multi burst functions. Take photo [Menu 4-1] Press the Menu key ( ) and select Camera > Take photo. Or, press the camera key ( ) in standby mode. 1. Focus on the subject to capture, then press the [OK] key or the side key. 2. ‘Saved’ is displayed below the captured image. The captured image is then automatically saved. 3. Press the [OK] key to continue taking pictures. Or press the right soft key [Delete] to delete the image.