-My address: You can check the address of Bluetooth. Note ]When user uses Bluetooth Device in the handset, the security of the handset is at risk. Therefore, we recommend that Bluetooth visibility be set to Hide after configuration or device pairing. For incoming files via Bluetooth regardless of paired devices, you can choose to accept or reject the connection, after checking the sender details. 3. Search and pair new device You can search new device as following menu. • Menu > >>9. Settings > >> 4. Connectivity > >> 1. Bluetooth > >> 2. Paired devices Settings Settings Settings 1. To search for a Bluetooth device to pair, press New. 2. Screen shows Searching for devices. Bluetooth devices within a range of 10m will be found. 3. If Bluetooth devices are found, these devices are listed on the screen. If no Bluetooth device is found, you will be asked if you want to search again. 4. Pairing procedure - Press . A window will appear on the screen asking you to enter your password. -After creating a password (of 1 to 16 digits), the user of the other device must enter the password for pairing. The user of the other device must know the password in advance for authentication. ] KG290 supports follow Bluetooth services -Headset profile -Hands-free profile -Object push profile -Serial port profile -File transfer profile -Dial-up networking profile Option ] Connect 1. If you want to open the connection to the selected device, select the Connect. 2. If you want to close the connection to the selected device, select the Disconnect. ] New: Using this menu, you can pair a new Bluetooth device with your phone. ] Remove: Using this menu, you can delete the paired Bluetooth device. ] Remove all: Using this menu, you can delete all of the paired Bluetooth devices. 1. Select a device to remove from the Paired devices screen. 2. You can remove a device by pressing the Delete key or by selecting Options >Remove. To remove all paired devices, select Options >Remove All. 1. To transmit data from your phone to another Bluetooth device, first select the application where the target data is saved. For example, to send data in the My stuff to another device, select Menu >6. My stuff >1. Images / 3. Videos / 4. Others >Select from option menu, Send via > Bluetooth 2. Transmitting data 1) Paired device found is displayed. If the desired device does not exist in the list, select [Options >New]. 2) Select the device to which you want to transmit data from the devices on the screen and press . Settings Settings Settings 3) If the other party selects [Yes] for [Connection request], the data is transmitted. Note ]Supported Bluetooth software (Bluetooth stacks) for DUN : -WIDCOMM Bluetooth for Windows 1.4 and 3.0 Network (Menu 9.4.2) The Network feature enables you to indicate whether the network used when roaming(outside your home area) is selected automatically, manually or preferably. Note ]You can select a network other than your home network only if it has a valid roaming agreement with your home network. Network selection (Menu 9.4.2.1) Automatic Use this to set the phone to automatically search for and select one of the networks available in your area. Manual If you want to select the desired network manually from a list of networks, you can activate this function. If the connection to the manually selected network is lost, the phone will give off a error tone and ask you to select a network again. The selected network must have a roaming agreement with your home network. The phone will let you select another network if the phone fails to access the initial selected network. The phone will default back to Automatic if it is switched off. Preferred You can set a list of preferred networks and the phone attempts to register with first, before attempting to register to any other networks. This list is set from the phone’s predefined list of known networks. Change frequency band (Menu 9.4.2.2) 1.PCS Only 2.EGSM/DCS GPRS attach (Menu 9.4.2.3) You can set GPRS service depending on various situations. Access point (Menu 9.4.2.4) Allow you to select the access point from the list. USB connection mode (Menu 9.4.3) You can activate USB connecton mode of your phone for serveral usages. If you use Mass storage function like USB memory card, select Mass storage in this menu. Mass storage is available for only external memory card. If you use Data service such as PC suite application, select Data service in this menu. If you use Music sync with Windows Media Player, select Music sync in this menu. Music sync is available for only music contents. If you want to synchronise with external memory, you can use 'External memory' as Primary storage. If you want to synchronise with internal memory, you can use ‘Internal memory’ as Primary storage. Settings Settings Settings Call Menu 9.5 Call divert (Menu 9.5.1) The Call divert service allows you to divert inc...
)
