Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
When you press these keys for a long time. • Used to call your voicemail box . • Used to add the international prefix . • Used to call Speed dials from to . • Used to enter a pause . ~ END/PWR key Used to end or reject a call. This key is also used as Power Key by pressing and holding this key for a few seconds. Key Description Clear key Deletes a character by each press. Hold the key down to clear all input. Also use this key to go back to the previous screen. KG225 Features Side keys Key Description Up/Down side keys When you open the flip, you can control the volume of key tone in the standby mode and the volume during a call. KG225 Features KG225 Features The table below describes various display indicators or icons that appear on the phone’s display screen. On-Screen icons Icon/Indicator Description Tells you the strength of the network signal. Call is connected. You can use GPRS service. Shows that you are using a roaming service. Line 1/2 is in use for outgoing calls – if you subscribe to the Two Line Service. The alarm has been set and is on. Tells you the status of the battery. You have received a text message. You have received a voice message. You have received a push message. Icon/Indicator Description Vibrate only menu in profile. General profile is activated. Loud profile is activated. Silent profile is activated. Headset profile is activated. Car profile is activated. You can divert a call. Indicates that the phone is accessing the WAP. Indicates that you are using GPRS. Installing the SIM card and the battery Make sure the power is off before you remove the battery. 1. Remove the battery. Press the button to release the battery, then slide the battery down till it stops. Now lift the battery from its compartment. Note ] Removing the battery from the phone when the power is on may cause the phone to malfunction. Getting started 2. Install the SIM card. Insert and slide the SIM card into the SIM card holder. Make sure that the SIM card is inserted properly and that the gold contact area on the card is facing downwards. To remove the SIM card, press down lightly and pull it in the reverse direction. To insert the SIM card To remove the SIM card Caution ] The metal contact of the SIM card can easily be damaged by scratches. Pay special attention to the SIM card while handling. Follow the instructions supplied with the SIM card. Getting started Getting started 3. Install the battery. Getting star te d Charging the Battery To connect the mains adapter to the phone, you must have installed the battery. 1. With the arrow facing you as shown in the diagram push the plug on the battery adapter into the socket on the bottom of the phone until it clicks into place. 2. Connect the other end of the mains adapter to the mains socket. Only use the charger included in the box. 3. The moving bars of battery icon will stop after charging is complete. While in charging, the charge status indicator, situated on the left of the charge connector, will blink in red, while at the end will light in green. Caution ] Do not force the connector as this may damage the phone and/or the charger. ] If you use the battery pack charger out of your own country, use an attachment plug adapter for the proper configuration. ] Do not remove your battery or the SIM card while charging. Warning ] Unplug the power cord and charger during lightning storms to avoid electric shock or fire. ] Make sure that no sharp-edged items such as animal teeth or nails come into contact with the battery. There is a risk of this causing a fire. Disconnecting the adapter Disconnect the travel adapter from the phone by pressing its side buttons as shown in the diagram. Getting started Note ] Ensure the battery is fully charged before using the phone for the first time. ] In the case the battery is not properly charged, please turn the phone off and on using the power key. Then detach and reattach the battery, and recharge the phone. Getting started Getting started Turning your phone on and off Turning your phone ON 1. Install a battery to the handset and connect the phone to an external power source such as the travel adapter, cigarette lighter adapter or handsfree car kit. Or install a charged battery pack to the handset. 2. Press and hold for a few seconds until the LCD screen is turned on. 3. Depending on the status of the PIN code request setting you may need to enter your PIN code. Turning your phone OFF 1. Press and hold for a few seconds until the LCD screen is turned off. Change codes You can use the access codes described in this section to avoid unauthorised use of your phone. The access codes (except PUK and PUK2 codes) can be changed by using the Change codes feature (Menu 9.4.5). PIN code (4 to 8 digits) The PIN (Personal Identification Number) code protects your SIM card against unauthorised use. The PIN code is usually supplied with the SIM card. When the PIN code request is set to Enable, your phone will request the PIN code every time ...