|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
You will be prompted to enter the password when turning on the device. • Prompt if device unused for: Set a length of time the phone waits for before locking itself when it is not in used. The device will be automatically locked after the specified length of time when the display turns off. You 59 settings will be prompted to enter the password when starting to use the device. • Change password: Change your password. The default password is 00000000, • PIN lock: Lock your SIM or USIM card by activating the PIN requirement. You need to enter the PIN supplied with your SIM or USIM card. • Change PIN1 code: Change the PIN1 code. • Change PIN2 code: Change the PIN2 code. • SIM lock: When this option is enabled, your device only works with the current SIM or USIM card. If you insert an unknown SIM or USIM card, your device will ask for the lock code. 60 Memory settings Customise the memory settings. • Memory card details: View the total amount of memory and available memory in a memory card. • Default memory: Set a default memory location for storing media files. • Memory status: View the amount of memory available for storing messages or files. Reset settings Set to restore default settings. Open source licence View the open source licence information on your device. troubleshooting When you turn on your device or while you are using the device, it prompts you to enter one of the following codes: I Code Try this to solve the problem: Password When the phone lock feature is enabled, you must enter the password you set for the device. PIN When using the device for the first time or when the PIN requirement is enabled, you must enter the PIN supplied with the SIM or USIM card. You can disable this feature by using the PIN lock menu. Code Try this to solve the problem: PUK Your SIM or USIM card is blocked, usually as a result of entering your PIN incorrectly several times. You must enter the PUK supplied by your sen/ice provider. PIN2 When you access a menu requiring the PIN2, you must enter the PIN2 supplied with the SIM or USIM card. For details, contact your sen/ice provider. a troubleshooting The device prompts you to insert the SIM card. Ensure that the SIM or US IM card is installed correctly. Your device does not show a signal (no bars next to the network icon) • If you just turned on the device, wait about 2 minutes for your device to find the network and receive a signal. • You may not be able to receive a signal in tunnels or elevators. Move to an open area. • You may be between service areas. You should receive a signal when you enter a service area. You forgot a PIN orPUK If you forget or lose this or another code, contact the seller or your service provider. b Your display shows white lines The display may show white lines if you have turned the device on after a long period of disuse or if you removed the batter/ without first turning off the device. The display should correct itself in a short time. You enter a number, but the call is not dialled • Ensure that you have selected H or y°u have pressed and held [«-*]. • Ensure that you have accessed the right cellular network. • Ensure that you have not set call barring for the phone number. You select a contact to call, but the call is not dialled • Ensure that the correct number is stored in the contact information. • Re-enter and save the number, if necessary. Another caller cannot hear you speaking • Ensure that you are not blocking the built-in microphone. • Move the built-in microphone closer to your mouth. • If using a headset, ensure that it is properly connected. The sound quality of a call is poor • Ensure that you are not blocking the internal antenna on bottom of the device. • When you are in areas with weak signals, you may lose reception. Move to another area and try again. The battery does not charge properly or sometimes your device turns itself off while charging • Disconnect the device from the charger, remove and reinstall the battery, and try charging again. • The battery terminals may be dirty. Wipe both gold-coloured contacts with a clean, soft cloth and try charging the battery again. • If the battery no longer charges completely, dispose of the old battery properly and replace it with a new battery. Your device is hot to the touch When you use applications that require more power, your device may heat up. This is normal and should not affect your device's lifespan or performance. c troubleshooting troubleshooting Your device prompts you to delete some data The available memory is low. Move your data to a memory card or delete old items from applications. You cannot find a Bluetooth-enabled device • Ensure that both devices have activated the Bluetooth wireless feature. • Ensure that the distance between the devices is not more than 10 metres and that they are not separated by walls or other obstacles. • Ensure that each device's visibility is activated. • En...