Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
The BRAVO PLUS pager fits easily in your pocket or purse, or can be worn on your belt. The BRAVO PLUS pager offers a number of features. We encourage you to read this instruction manual carefully to obtain the full benefits from your BRAVO PLUS pager. CONTROLS Alert Menu (F) Read (R) On/Off Switch Alert Lamp SILENT ModeON Mode to the ON symbol (# and the lamp flashes A full-segment displa D 4 SETTING THE TIME • To set the time, press Funtil seTr Trime is displayed, then press R. • The hours digits (represented by the grey characters in the sample shown below) begin to blink. Set the hours digits by pressing Runtil the correct hour is displayed along with the appropriate a (for A.M.) or p (for P.M.) symbol. Keep pressing Rto cycle through the hours from A.M. to P.M. When the correct hour (A.M. or P.M) is displayed, press Fto advance to the minutes digits. • The first digit of the minutes (represented by the grey character) begins to blink. Press R to change the first digit of the minutes. Press Fto advance to the second digit of the minutes. Press Rto change the second digit of the minutes. Press F one more time to leave the time setting function. • All portions of the time of day screen, except the colon (:), stop blinking. The time of day is now set and the pager is in the standby mode. 12:00a 8:00a LOCKING A MESSAGE To lock a message (protect it from being overwritten or erased), press Fwhile the message or timestamp screen is displayed. = is displayed on the upper, right-hand corner of the screen to indicate that the message has been any of its buttons. locked. Up to 5 messages can be locked in memory. 555-1212 A First Screen of a Locked Message 01 12:46p A Second Screen of a Locked Message To unlock a message, follow the procedure used to lock it. The lock symbol disappears from the message and timestamp screens. ERASING MESSAGES The “Erase All” function deletes all read, unlocked messag es from memory. To erase unwanted messages, press Funtil erase all is displayed, then press R. All read, unlocked messages are removed from memory. All unread and locked messages are moved to the first memory slots and carry the new message slot number. NOTE: You must first read a message before it can be sage was received). erased. 6 SELECTING AN ALTERNATE FREQUENCY Master Reset: Pressing the On/Off Switch twice resets the pager and causes the pager to return to the standby mode. Synthesized and Auto-Synthesized Models: Reminder Chirp: When an unread message is stored in • Press F until your choice of scan mode or frequency memory, the pager gives a reminder chirp (short beep) evdesignator is displayed (for example: scan1, f1, f2, ery two minutes. Vibrate models emit a short vibration in etc.). place of the chirp when in the SILENT mode. • To view alternate frequencies, press R. When scan or Duplicate Message: Incoming messages are compared the frequency designator you wish to select is displayed, to messages stored in memory. If a new message is identipress F to “lock in” the new frequency or mode. cal to a message in memory, duplicaTre is shown for 2 seconds at the beginning of the message. The new times • When confirm is displayed, press R to activate your tamp follows the duplicate message. selection. Low Battery Indicator: When the battery nears the end of STANDARD FEATURES its life, the time-of-day screen is replaced with lo cell. The battery must be replaced within a few days to avoid in- Time of Day/Standby Screen: The time of day is dis-terruption of pager operation. played while the pager is on and in the standby mode. Tone Alerting: The BRAVO PLUS pager can also respond Time Stamp:The time of day that each message was re-as a basic tone-alert model.When a tone-only message is received is displayed on a separate screen following the ceived, Trone onlyreplaces the standard message screen. message. Unread Message Counter: When unread messages exist, Memory Retention: When the pager is turned off, all mes-the standby screen is replaced by the unread message indisages and the time of day remain in memory. cator. The unread message indicator displays the number of Memory Capacity: The pager can store up to 16 messag-pages that have not been read, and is updated anytime a es or a total of 160 characters. Individual messages can be message is received (except if message duplication occurs). up to 20 characters in length. If R is pressed, and there are no messages in memory, no pages is displayed. Message Protect/Lock: Up to five individual messages can be locked in memory so they will not be overwritten by new Memory Full Indicator: If 16 messages or 160 characters messages or discarded during the “Erase All” function. are stored in memory, memory full is displayed in place of the standby screen. A new message could cause the Hold Full Indicator: You can selectively protect up to 5 oldest (first) unlocked, read message to be overwritten. messages by locking them in memory. When an attempt to When some or all of the ...