Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Read all instructions carefully before using this product. 2. This product is suited for normal household use only, and not intended for commercial applications. 3. To protect against risk of electrical shock do not immerse motor housing (base), cord, plug in water or other liquid. 4. Close supervision is necessary when any appliance is used by or near children. 5. Keep out of reach from children. 6. Do not reach into the filling shaft while the motor is running. Always use the pusher to guide food into the shaft. 7. Remove plug from outlet when the appliance is not in use before putting on or taking off parts, and before cleaning. Allow to cool before handling. 8. Acoid contacting moving parts. 9. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment. 10. The use of accessory attachments not recommended or sold by the appliance manufacturer may cause fire, electrical shock or injury. 11. Do not use outdoors. 12. Do not let cord hang over edge of table or counter, or touch hot surfaces. 13. To disconnect, turn any control to «off», then remove plug from wall outlet. 14. Do not use appliance for other than intended use. A. Always make sure juicer cover is clamped securely in place before motor is turned on. Do not unfasten clamps while juicer is in operation. B. Be sure to turn switch to off position after each use of your juicer. Make sure the motor stops completely before disassembling. C. Do not put your fingers or other objects into the juicer opening while it is in operation. If food becomes lodged in opening, use food pusher or another piece of fruit or vegetable to push it down. When this method is not possible turn the motor off and disassemble juicer to remove the remaining food. SAVE THESE INSTRUCTIONS Our products are engineered to meet the highest Description standards of quality, functionality and design. We hope you thoroughly enjoy the new Braun appliance. Caution • Read all instructions carefully before using this product. • This product is suitable for normal household use only and not for commercial use. • Keep out of children’s reach. • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. • Do not reach into the filling shaft while the motor is running. Always use the pusher to guide food through the shaft. • Remove plug from socket before assambling or disassembling appliance. • Braun electric appliances meet applicable safety standards. Repairs on electric appliances must only be done by authorized service personnel. Faulty, unqualified repair work may cause accidents or injury to the user. • The mains cable of this appliance can only be changed by an official Service dealer, since it requires a special tool. Specifications • Voltage/wattage: See typeplate on the bottom of the appliance. • Safety system: The appliance can only be switched on when the cover has been fully locked into position and can only be opened when the switch has been turned off. • Motor stop: The motor will stop completely within 2 seconds of switching the appliance off. Safety fuse If the appliance is overloaded the safety fuse will cut out. To restart the appliance: • Turn the switch 2 off = «0» (important!). • Unlock and remove the cover 7 . • Clean the juice ring 5 , filter 6 and cover 7 . • Allow the appliance to cool down approx. 20 minutes. • Assemble the juicer again. • Turn the switch 2 on = «/». • If the appliance still does not run, allow it to cool down again. 1 2 3 4 5 6 7 8 9 10 11 12 13 Motor part On/off switch Unlocking buttons Pulp container Juice ring Filter Cover Filling shaft Filling tray Pusher Juice spout Juice container with foam separator Cord storage Before using for the first time, wash the juicer parts (see «Disassembling» and «Cleaning»). Assembling 1. Put the juice ring 5 on the motor part (fits loosely without engaging). 2. Lay the filter 6 into the juice ring 5 . 3. Put the cover 7 on and push down firmly with both hands until your hear it snap into place. 4. Hang the pulp container 4 into the hinges (the top one first); then close it and be sure it snaps into place. 5. Put the juice container 12 underneath the juice spout 11 (A). Capacity: 500 ml/16.9 fl. oz. The juice container comes with a foam separator to ensure clear foam-free juice. If it is not required simply remove it from the juice container. You can, of course, place a glass or other container underneath the juice spout to collect the juice. 6. For easier filling, put the filling tray 9 on top of the filling shaft 8 (A). Preparing fruit or vegetabl...