Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
USING YOUR JUICE EXTRACTOR This appliance is designed to extract juice from fruits & vegetables. Do not use this appliance for any other purpose. For indoor domestic use only. Prepare material to be processed by washing thoroughly and peeling as required. Remove all pips and large seeds. Large items may need to be cut into pieces to fit the inlet chute. Smaller items may be placed directly into the chute and guided into the juice extractor using the relevant pusher. Make sure the speed switch is in the ‘’0’’ (OFF) position, then plug the cord-set into a power outlet. Note: Make sure that the voltage shown on the underside of the motor housing corresponds with the local supply voltage. Press the switch to select speed I or II as required. Low speed should be used for soft fruits and high speed for harder fruits. Check that the pulp collector is in place, and place a suitable container under the spout. Place the ingredients into the inlet chute. The pusher can be used to gently guide the ingredients down the inlet chute. Do not overload the machine. Too much pressure may cause material to jam the inlet chute. Note: Juice may continue to flow after the appliance has been turned off. This appliance should not be operated continuously for more than 1 minute at a time. After 1 minute’s use, the appliance should be allowed to cool at least 2 minutes before using it again. If a blockage occurs, NEVER USE FINGERS OR ANY OBJECT OTHER THAN THE PUSHER TO CLEAR THE INLET CHUTE. If the food cannot be dislodged, turn the speed selector to the “0” position (OFF) and UNPLUG the POWER CORD FROM OUTLET. Remove the cover as described in this Use and Care Book and clear the blockage. Replace the cover, re-connect the juice extractor to the electrical supply & resume juicing. When juicing is completed, the switch should be returned to the “0” (OFF) position, and allow the motor to come to a stop. The jug should be left in place until the juice stops flowing from the spout. UNPLUG POWER CORD FROM THE OUTLET, and disassemble the juice extractor. Empty the pulp from the collector and clean all parts as soon as possible after you have finished processing. Note: The juice extractor will not operate unless all the parts are correctly fitted. Note: The strainer will continue to rotate after the appliance has been turned off. Note: Do not approach any parts that move in use. Allow the motor to come to a complete stop before removing any part of the appliance. EMPTYING THE PULP CONTAINER / STRAINER If the pulp container (3) becomes full before all of the ingredients are used, press the switch (15) to select the ''0'' (OFF) position and unplug the juice extractor. Take hold of the pulp container pull it away from the motor housing and discard the pulp. The pulp can be discarded and the strainer returned to its position in the motor housing. Reconnect the unit to the power supply & recommence juicing. Care and Cleaning This product contains no user serviceable parts. Refer service to qualified service personnel. HOW TO TAKE CARE OF YOUR JUICE EXTRACTOR The juice extractor must be cleaned thoroughly after each use. Make sure the appliance is switched ‘OFF’ and unplug the unit from the power supply before cleaning. Note: Never immerse the motor housing in water or any other liquid. To clean motor housing, wipe clean with a damp cloth. Allow to dry thoroughly before re-using or storing. The removable parts of the juice extractor assembly should be washed promptly after each use with a mild detergent in warm water. These parts are not dishwasher safe and must be hand washed. Use a brush to scrub pulp residue from the cutting teeth and strainer holes of the strainer. After washing, rinse and allow all parts to dry thoroughly before re-assembly and storage. Never use a metal brush to clean the strainer. Take care when handling the strainer as the blades are sharp. Warning: Do not use the appliance if the rotating strainer is damaged. ...