Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
4 Press the lid into place. 5 Place the measuring cup into the opening in the lid until it is firmly fixed. 6 Make sure the control switch is off. Then, connect to the power socket. 7 Turn the control switch to the suggested speed. 8 Once complete, switch off and unplug. Remove the blender jar from the motor unit. 9 Pour out the drink through the spout of the blender jar. Notes ••Dry ingredients must not be processed for more than 1 minute. ••While the motor is running, ingredients (for examples: ice cubes and tomatoes) can be added into the blender through the opening in the lid. ••Make sure to position the sieve of the lid is in front of the spout of the jar for smooth liquid pouring. ••To disassemble the blender, follow the instructions above in reverse order and direction. ••Refer to the end of this user manual for the recommended quantities, speed settings, and processing time. Blending with Filter For extra finely blended sauces, fresh fruit juices or soy milk, you can use the filter. All pips and skins will remain in the filter. 1 Mount the the knife unit onto the jar. Fix it by turning it in the direction of the arrow. 2 Turn and lock the blender jar onto the motor unit until it locks into position. 3 Put the filter in the blender jar. Make sure the filter is properly fitted on the bottom of the jar. 4 Put the lid in place to fix the filter. 5 Put the ingredients, water, or any other liquid in the filter. 6 Put the measuring cup in place and switch on the blender. 7 Select the highest speed and let the appliance run for maximum of 40 seconds. 8 Switch the blender off and remove the blender jar from the motor unit. 9 Pour out the drink through the spout of the blender jar. Notes ••Never overfill the filter. Do not fill the filter beyond its metal part. ••Cut fruits into small pieces, and soak dried ingredients thoroughly, like soy beans, before processing. ••Do not use the filter to process hot ingredients. Cautions ••Be careful not to exert too much pressure on the handle of the jar. ••Never fill the jar with ingredients that have a temperature of over 60°C. ••Never overfill the blender jar above the maximum level indication (1.0 liters) to avoid spillage. ••Always insert the measuring cup into the lid before you start processing. ••Do not run the blender for more than 3 minutes at a time. If you have not finished blending after 3 minutes, switch the blender off and let it cool down to room temperature before you continue processing. ••Never put your hand or any object in the jar while the blender is running. ••Always set the control knob to 0 before you open the lid. Grinding The mill attachment can be used for grinding dry ingredients only. Follow the assembling steps for grinding dry ingredients. Remember to install the mill rubber ring before use. Put the ingredients in the beaker. 1 Screw the blade unit onto the beaker. Fix it by turning it in the direction of the arrow. 2 Turn the assembled mill upside down, place and lock it on the motor unit. 3 Turn the control switch to the suggested speed. 4 Once complete, switch off, unlock, and remove the mill from the motor unit. 5 Unscrew the blade unit from the beaker. Notes ••The mill is not suitable for ice crushing. Use the blender. ••Do not fill the beaker beyond the maximum indication. See the table for the advised quantities. ••Never use the mill for more than 30 seconds without interruption. Chopping The chopper attachment can be used for chopping ingredients such as nuts, meat, hard cheese, dried fruits, chocolate, garlic, herbs, dry bread etc. Follow the assembling steps for chopping. Remember to install the chopper rubber ring before use. 1 Put the ingredients in the beaker. 2 Screw the blade unit onto the beaker. Fix it by turning it in the direction of the arrow. 3 Turn the assembled chopper upside down, place and lock it on the motor unit. 4 Switch the chopper on. 5 When you have finished chopping, switch the chopper off. 6 Unlock and remove the assembled chopper from the motor unit. 7 Unscrew the blade unit from the beaker. Tips ••Cut large ingredients into pieces approximately 2 cm before processing. ••If the ingredients are not evenly distributed, turn the appliance off. Open the lid and distribute the ingredients evenly on the surface of the chopper. Turn the appliance on again. Notes ••The chopper is not suitable for chopping hard ingredients like coffee beans, dry beans, nutmeg and uncooked rice. Use the mill. ••Do not use the chopper for mixing liquids. Use the blender. ••The cutting edge of the blades are very sharp, avoid touching them. ••Never exceed the maximum quantity. See the table for the advised quantities. ••Never use the chopper for more than 30 seconds without interruption. 5 Cleaning It is easiest to clean the juicer, its parts and accessories immediately after use. Notes ••Unplug the juicer before you started cleaning it. ••Wait until the juicer has cooled down sufficiently before cleaning it. ••All detachable accesso...