Оценок - 1, средний балл: 4
(
)
)
|
Фрагмент инструкции
Pass this manual on to whoever might acquire the appliance at a future date. - 1 CITRUS PRESS KH 25 Intended use The appliance is intended for the extraction of juices from citrus fruits such as oranges and lemons. Only foodstuffs may be processed with the appliance. All other usages or modifications are regarded as contrary to the operating instructions and contain a great risk of accidents. The manufacturer accepts no liability for damage(s) resulting from usage that is contrary to these instructions. Not for commercial use. Technical Data Mains voltage: 220-240 V~ 50 Hz Rated output: 25 W Protection class: II / Items supplied Citrus Press Large squeezing cone Small squeezing cone Fruit pulp sieve (2 parts) Operating instructions Important safety instructions To avoid potentially fatal electric shocks: • The rating of the local power supply must tally completely with the details given on the rating plate of the appliance. • Arrange for defective power plugs and/or cables to be replaced at once by qualified technicians or our Customer Service Department. • Arrange for damaged or malfunctioning appliances to be inspected and/or repaired by a qualified specialist or the Customer Service Department as soon as possible. • Do not expose the appliance to rain and never use it in a humid or wet environment. Ensure that the power cable never becomes moist or wet during operation. To avoid the risks of fire and burn injuries: • This appliance is not intended for use by persons (including children) with reduced physical, sensorial or mental cabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. • Children should be supervised to ensure that they do not play with the appliance. • Provide for a safe and slip-free positioning of the appliance. • Ensure that the power plug is easily accessible in the event of danger, and that there is no danger of anyone tripping over the power cable. - 2 Using the appliance safely: • In the event of danger, immediately remove the power plug from the wall socket. • Never use the appliance for purposes other than those for which it was designed. • Remove the power plug from the wall socket when the appliance is not in use, when you remove parts and before cleaning the appliance. • Do not use the appliance outdoors. Appliance description q Lid w Large squeezing cone e Small squeezing cone r Upper fruit pulp sieve t Fruit pulp regulator y Lower fruit pulp sieve u Juice collector i Drive axle o Power cable with power plug a Appliance plinth s Power cable storage Set-up and assembly of the appliance Important: Ensure that the power plug is not in the power socket before assembling the appliance. Otherwise there is a risk that the appliance could start unintentionally. 1. Unwind the power cable o completely from the cable storage s and secure it in the lateral recess on the appliance plinth a. 2. Place the appliance plinth a on a level and slipfree surface. Note: Rinse all removable components thoroughly before the first usage of the appliance (see chapter "Cleaning and care"). 3. Place the juice collector u on the drive axle i of the appliance plinth a and turn it clockwise as far as it will go. 4. Place both parts of the fruit pulp sieve r/y into each other so that the fruit pulp regulator t protrudes through the recess. Both parts must audibly engage. 5. Place the assembled fruit pulp sieve r/y on the juice collector u. The fruit pulp regulator t must lie on the grip and catch in the rabbet on the grip. 6. Press the small squeezing cone e on the drive axle i so that it engages. Note: If you want to press oranges or other larger fruits, place the large squeezing cone w over the small squeezing cone e. Ensure that the lobes of the small squeezing cone e engage in the recesses of the large squeezing cone w. 7. Insert the power plug into a wall power socket. The appliance is now ready for use. - 3 Juice extraction Note: When pressing out juice, do not exceed the 600 ml volume marking on the scale of the juice collector u. 1. Adjust the fruit pulp regulator t, by sliding it, so that the slits in the fruit pulp sieve r/y lie exactly above each other if you wish to have fruit juice with fruit pulp. Adjust the fruit pulp regulator t , by sliding it, so that the slits in the fruit pulp sieve r/y are not lying above each other if you do not wish to have fruit juice with fruit pulp. 2. Cut the fruits in half (orange, lemon etc.) 3. Press the halved fruit lightly onto the squeezing cone w/e. The appliance switches itself on automatically as soon as the squeezing cone w/e is pressed down. 4. Apply pressure at various parts of the fruit rind with your fingers. Thereby the juice will be evenly squeezed out of the fruit. 5. When no more juice flows from the fruit, stop applying pressure to the squeezing cone w/e. The appliance stops. 6. Press the squeezing cone w/e down repeatedly to ...