Войти:
Оценок - 4, средний балл: 4 ( )

Инструкция по эксплуатации Honda Automobiles, модель HS622

Производитель: Honda Automobiles
Размер: 1.52 mb
Название файла: 46fbbc47-2999-41bb-8282-91526cc8c751.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Clean any dirt from around the spark plug base, then remove the spark plug. b. Install the spark plug in the plug cap. c. Turn the engine switch on. d.Ground the side electrode at any engine ground and crank the engine to see if sparks jump across the gap. B Gasoline is highly flammable and explosive. If ignited, gasoline can burn you severely. l Be sure there is no spilled fuel near the engine. l Place the spark plug away from the spark plug hole. e. If there are no sparks, replace the plug. If sparks occur, try to start the engine according to the instructions. 7. If the engine still does not start, take the snowblower to an - authorized Honda dealer. If the auger or blower does not operate, check the shear bolts (p. 39 1. Replacement shear bolts and nuts were supplied with your snowblower. Additional shear bolts and nuts are available from authorized Honda snowblower dealers. Do not replace shear bolts with ordinary hardware bolts. SPECIFICATIONS Frame Model HS622 TA Power equipment SZAL discription code Overall length 1,460 mm (57.5 in) Overall width 550 mm (21.7 in) Overall height 1,125 mm (44.3 in) Dry weight 66 kg (146 Ibs) Width of snow clearance 550 mm (21.7 in) Height of snow clearance 420 mm (16.5 in) Snow throwing distance Max. 14 m (45.9 ft) (differs according to the kind of snow) Clearing capacity 35 Ton/hour Continuous operating time 3 hours Engine Mnfbl t HONDA GX160 Kl Maximum output 1 4.9 hp


Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории