Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Open the outside doors. WARNING: Exhaust fumes are dangerous (con tain ing CAR BON MONOXIDE, an ODOR LESS and DEAD LY GAS). • Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes. • Never operate the snow thrower without proper guards, plates or other safety protective devices in place. • Never operate the snow thrower near glass en clo sures, automobiles, window wells, drop–offs, and the like without proper adjustment of the snow discharge angle. Keep children and pets away. • Do not overload the machine capacity by attempting to clear snow at too fast a rate. • Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing up. • Never direct discharge at bystanders or allow anyone in front of the unit. • Disengage power to the auger/impeller when snow thrower is transported or not in use. • Use only attachments and ac ces so ries approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, cabs, tire chains, electric start kits, etc.). • Never operate the snow thrower without good visibility or light. Always be sure of your footing and keep a firm hold on the handles. Walk; never run. • Do not overreach. Keep proper footing and balance at all times. • This snow thrower is for use on sidewalks, driveways and other ground level surfaces. • Do not use the snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings. MAINTENANCE AND STORAGE • Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition. • Never store the snow thrower with fuel in the tank inside a building where ignition sources are present such as hot water and space heaters, clothes dryers, and the like. Allow the engine (motor) to cool before storing in any enclosure. • Always refer to operator’s guide instructions for important details if the snow thrower is to be stored for an extended period. • Maintain or replace safety and in struc tion labels, as necessary. • Run the snow thrower, with auger engaged, a few minutes after throwing snow to clear the machine and prevent freeze-up of the auger/impeller. CONGRATULATIONS on your purchase of a new snow PRODUCT SPECIFICATIONS thrower. It has been designed, engineered and manu factured to give best possible dependability and per formance. Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center. We have competent, well-trained tech ni cians and the proper tools to service or repair this unit. Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower prop erly. Always observe the “SAFETY RULES”. Gasoline Capacity 4.0 Quarts and Type: Unleaded Regular only Oil Type SAE 30 (above 40°F) (API-SF-SJ): SAE 5W-30 or 10W-30 (0° to +40°F) SAE 0W-30 (below 0°F) Oil Capacity: 26 Ounces Spark Plug: Champion RN4C (Gap: .030") SERIAL NUMBER: ___________________________ DATE OF PURCHASE: _______________________ THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A DECAL ATTACHED TOTHE REAR OF THE SNOW THROWER HOUSING. YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE FOR FUTURE REFERENCE. CUSTOMER RESPONSIBILITIES • Read and observe the safety rules. • Follow a regular schedule in maintaining, caring for and using your snow thrower. • Followthe instructions under “Maintenance”and “Storage” sec tions of this own er’s manual. 3 SAFETY RULES........................................................2-3 MAINTENANCE.....................................................14-15 PRODUCT SPECIFICATIONS......................................3 MAINTENANCE SCHEDULE.....................................14 CUSTOMER RESPONSIBILITIES................................ 3 SERVICE AND AD JUST MENTS ........................... 16-18 WARRANTY................................................................ 32 STORAGE ................................................................... 18 ASSEMBLY / PRE-OPERATION ............................... 5-7 TROU BLE SHOOT ING ................................................ 19 OPERATION ............................................................ 8-13 REPAIR PARTS...................................................... 20-31 PARTS PACKED SEPARATELY IN CARTON 4 ASSEMBLY / PRE-OPERATION Read these instructions and this manu al in its entirety before you attempt to assemble or operate your new snow thrower. Your new snow thrower has been as sem bled at the factory with the excep tion of those parts left unassembled for shipping purposes. All parts such as nuts, washers, bolts, etc., necessary to com plete the as sem bly have been placed in the parts bag. To ensure safe and proper operation of your snow thrower, all parts and hard ware you assemble must be tightened se cure ly...