Оценок - 1, средний балл: 5
(
)
)
|
Фрагмент инструкции
Place the pivot pin through the blade assembly bracket and push bar. Position the push bar under the tractor front axel and attach it to the axel using two pins and spring clips. Attach the spring end of the lift rod to the push bar assembly and the other end to the tractor lift arm using two spring clips. OPERATION Alternate holes are provided to permit adjustment of the shoe assemblies for raising or lowering the blade when cleaning gravel drives or walks. When cleaning concrete it is desirable to allow the blade to scrape the surface. Tbe angle of the blade is adjustable to permit plowing to the left or right by moving pivot pin to the desired hole in the blade mounting bracket. When using this equipment is is recommended that chains and wheel weights be installed on the tractor. Loose mouht* mg of the chains will make them self-cleaning. If it is desired to use a tiller or other attachment when the blade is mounted, the transport hook which is holted to the frame at the front of the tractor should be used. With the blade hooked in the transport position, the lift arm can be removed from the tractor. The lift can then be used to raise or lower another attachment. WHEEL WEIGHTS & I -CHAIMS arei I Ref. No. Part No. Qty. Req. Description 1 107047 1 42” Blade Assembly 2 107045 1 Wear Plate 3 705004 6 Carriage Bolt, 3/S”-16x3/4" 4 720002 6 Lock Washer, 3/8" 5 717003 6 Hex Nut, Full, 3/8”-16 6 107024 2 Shoe Assembly 7 702002 4 Carriage Bolt, 3/8' -16 x 1" £ 72000Z 4 Lock Washer, 3/3" 9 717003 4 Hex Nut, Full, 3/3”-16 10 1603601 1 Pivot Pin 11 1603602 1 King Pin 12 Ô161045 1 Spring Oip 13 1607911 1 Push Bar Assembly 14 118053 2 Pin 15 106788 2 Hairpin Clip 16 8031007 2 Collar 17 713006 2 Set Screw, 5/16^16 x 3/6,J 18 171679 1 Rod Guide 39 171011 1 Spring 20 160323 1 Front Lift Rod 2: 106788 Hairpin Clip 22 172432 1 Fuel Tank Cap (Winterized) 23 177973 I Transport Chain Assembly 24 106719 1 Film, Simplicity 25 103005 1 Model No. Plate 26 107142 1 Decal, Instructions i I I I Ref. No. Part No. Qty. Req. Description 1 705009 1 Hex Capscrew, W'16x 1-1/2" 2 1S4177 1 Spacer 3 719001 1 Plain Washer, 3/8H 4 720002 1 Lock Washer, 3/8" 5 717003 1 Hex Nut, Full, 3/8"-16 6 174438 1 Deflector 7 705002 2 Hex Capscrew, 1/4'-20x1/2’' 8 720003 2 Lock Washer, 1/4" 9 717005 2 Hex Nul. l/4"«20 Install the deflector as illustrated. If the unit is equipped with lights the deflector is mounted using the same hardware that secures the headlight....