Войти:
Оценок - 1, средний балл: 4 ( )

Инструкция по эксплуатации Simplicity, модель 10528

Производитель: Simplicity
Размер: 3.86 mb
Название файла: c3cd537b-9b09-4d74-aba7-b9e4790cd323.pdf
Язык инструкции:en
Перейти к скачиванию



Фрагмент инструкции


Sound Power in Decibels J. Sound Pressure at Operator’s Position in Decibels K. Vibration This unit complies with ISO 8437, European Machinery Directive 98/37/EC, and European EMC Directive 89/336/EC. PRODUCT REFERENCE DATA Model Description Name/Number Unit MFG Number Unit SERIAL Number Mower Deck MFG Number Mower Deck SERIAL Number Dealer Name Date Purchased ENGINE REFERENCE DATA 1 Engine Make Engine Model Engine Type/Spec Engine Code/Serial Number Mfg. No.: 269XXXX Serial No.: XXXXX kW: XXX Engine RPM XXXX LpA: XXX dB(A) Vibration: XXX m/s* Simplicity Mfg. Inc. 'Port Washington, Wl USA 53074-0997 CE Models: Place copy of Identification Tag here. 7 57661 Features, Controls, & Operation Please take a moment and familiarize yourself with the name, location, and function of these CONTROL LOCATIONS ■■V Manual tikÜl Rotator Model Electric Rotator Model The information below briefly describes the function of individual controls. Starting, stopping, and driving require the combined use of several controls applied in specific sequences. To learn what combination and sequence of controls to use for various tasks see the OPERATION section. Speed Selector Selects forward speeds 1-5 and reverse speeds 1-2. No neutral position or gate is required, since the traction drive design automatically provides "neutral" (no forward or reverse movement), whenever the Drive Control is released. Traction Control / Free Hand™ Lock Engages traction drive to wheels when depressed. Also locks auger control when depressed simultaneously. Releasing the traction control lever releases the Free Hand™ auger control lock and stops the drive wheels. 8 Features & Controls Auger Control Engages the auger/impeller when depressed. Releasing the control stops the auger/impeller. Chute Direction Control Models with Electric Chute Rotator: Depressing the chute rotator switch rotates the chute left or right. Models with Manual Chute Rotator: Turning the crank rotates the discharge chute to desired position. 10 Remote/Regular Deflector Control Regular (Knob) Chute Deflector: Locks chute deflector in desired position. Tilting the chute deflector UP provides a higher stream and greater distance, while tilting the deflector DOWN provides a lower stream and less distance. Remote Chute Deflector: Twist the knob to unlock the chute deflector. Pull or push the knob to change the deflector angle. UP provides a higher stream and greater distance, while tilting the deflector DOWN provides a lower stream and less distance. Easy Turn™ Control Easy Turn Control: Engaging the Easy Turn™ lever releases the right wheel to allow easy turning in tight areas. Releasing the control automatically engages both drive wheels for full traction. Traction Lock Pins: The right traction wheel can be completely released using the locking pin (see Figure 7). This allows the unit to be easily moved with the engine off. Fuel Fuel tank filler cap (see illustration). Note: The fuel shut off valve is located under the fuel tank or on the front of the engine. Close the valve when the snowthrower is not in use. Open the valve before starting. Primer Button When pressed, the primer button provides initial fuel to help start a cold engine. Normally, pressing the primer button twice will provide enough fuel to start a cold engine. Throttle Lever Controls engine speed. Move toward the hare icon for faster engine speed, move toward the turtle icon for slower engine speed. Move the throttle all the way to STOP to stop the engine. Set throttle to FULL/FAST (hare icon) for operation. Engine Key The engine key prevents the engine from being started. The key must be fully inserted into the key slot for the unit to start. The key can also used to stop the engine by pulling the key out of the key slot. Choke Knob The choke knob adjusts the air/fuel mixture, and is used to help start a cold engine by providing a richer mixture. Once the engine is warm and running smoothly, the choke knob should be set to the off position to provide a normal air/fuel mix. Starter Electric Start (If Equipped): Depressing the starter button activates the electric starter. The electric start button operates on 120 Volts AC, which is provided by connection to the extension cord provided with units equipped with this feature. Connect this extension cord ONLY to a properly grounded 3 prong electrical outlet. Recoil Starter (All Models): Pulling the recoil handle cranks the engine. Grip Warmers (Select Models) The optional grip warmers are powered when the engine is running and have three settings: low, off, and high. bJ Headlight (Select Models, Not Pictured) For use in low sunlight - early morning and evening. The headlight is on at all times when the engine is running. 9 Operation GENERAL OPERATION CHECKS BEFORE EACH START-UP 1. Make sure all safety guards are in place and all nuts, bolts and clips are secure. 2. Check to make sure that the clean-o...

Эта инструкция также подходит к моделям:
Снегоочистители - 1338 (3.86 mb)
Снегоочистители - 1380 (3.86 mb)
Снегоочистители - 10560 (3.86 mb)
Снегоочистители - 11532 (3.86 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории