Оценок - 2, средний балл: 3 ( )

Производитель: Craftsman Размер: 812.91 kb Название файла: a856bda9-6012-4e27-8a27-02482ec322c3.pdf Язык инструкции:

• Adjust snow discharge angle for safe flow when operating near glass enclosures, automobiles, window wells, dropoffs, etc. • Do not overload machine capacity by clearing snow at too fast a ground speed. • Never operate machine at high transport speeds on slippery surfaces. Use care when backing up. • Disengage Auger Control when transporting or not in use. • Never operate the snowthrower without good visibility or light. Always be sure of your footing. • Do not change the engine governor settings or over- speed the engine. • Never direct the discharge chute at bystanders; nor allow anyone in front of the unit while it is operational. • Never operate this machine without all of the proper guards or other safety protective devices in place. • Keep all nuts, bolts and screws tight to ensure that the equipment is in safe operating condition. • Never store equipment with gasoline in the tank in a building where fumes may reach an open flame or spark. Allow the engine to cool before storing in any enclosure. • Always refer to the Operator’s Manual for important details if snowthrower is to be stored for an extended period. • Run auger drive a few seconds after completion of throwing snow to help clear out snow and prevent icing and freeze-up on unit. 3 Safety Signs & Decals SAFETY DECALS Safety warning decals are placed at strategic locations on the snowthrower as a constant reminder to the opera- tor of the most important safety precautions. All warning, caution and instructional messages on your snowthrow- er should be carefully read and obeyed. If any of these decals are lost or damaged, replace them at once. They can be purchased from your local dealer. WARNING TO AVOID SERIOUS INJURY • Read Owner’s Manual before operating unit. • Never allow children to operate snowthrower. • Always direct discharge chute so as to avoid injury to persons—or damage to property • Stop engine and disconnect spark plug wire before removing debris or servicing unit. • Keep all shields and guards in place while running. AVOID INJURY FROM ROTATING BLOWER! Shut off engine before unclogging discharge chute. 1716533 Part No. 1716533 Discharge Chute Danger Decal Part No. 1715556 WARNING / Main Dash Decal Part No. 1715555 Auger Control Decal DANGER AVOID INJURY FROM ROTATING AUGER! Keep hands, feet, and clothing away. 1716532 Part No. 1716532 Auger Danger Decal Engine "Hot" Decal Decal supplied by the engine manufacturer. See your local Tecumseh dealer. ADDITIONAL DECALS Additional decals used on this unit are also available, and may be desired as replacement parts to maintain the performance and value of your unit. These can also be purchased from your local dealer. Part No. 1715557 Speed Selector Decal Part No. 1715558 Simplicity Logo Decal SNO-AWAY 755cm TOUCH-UP PAINT PART NUMBERS 13 Oz. Spray Can Paint Deep Orange 1685611 Gloss Black 1685639 1/2 Oz. Touch-Up Bottle Deep Orange 1685615 Part No. 1709061 Part No. 1714107 (755) Or Part No. 1714108 (555) Touch-Up Paint ID Decal Simplicity Logo Auger Decal 4 Control Reference Chart SNOWTHROWER CONTROLS A Speed Selector Selects Forward Speeds 1 - 5, Reverse Speeds 1 - 2 B Drive Control Engages drive to wheels as it is depressed; disengages when released. C Auger Control Engages auger/impeller as it is depressed; disengages when released. D Chute Direction Control Rotates discharge chute to desired direction E Chute Deflector Controls vertical angle snow is thrown. F Chute Deflector Knob Locks chute deflector at desired angle G Skid Shoes Controls height of scraper bar H Traction Lock Pins Engages for drive and disengages for free-wheeling C B D E G A F H Figure 1. Snowthrower Controls ENGINE CONTROLS A Electric Start Button (Optional) Activates electric starter B Fuel Valve Turns fuel supply on or off. C Starter Handle Used to start engine D Primer Button Primes carburetor for faster cold starting. E Throttle Lever Controls engine speed F Engine Key Prevents starting of engine without key. Stops engine when removed. G Choke Knob Adjusts air/fuel mixture A EF C D G B Figure 2. Engine Controls 5 Controls STARTING CONTROLS Electric Start Units Only A. Electric Start Button - The Electric Start Button (A, Figure 3) activates an electric starter mounted to the engine, eliminating the need to pull the starter handle. The Electric Start Button operates on 120 Volts AC, which is provided by connection to the extension cord provided with units equipped with this feature. Connect this extension cord ONLY to a properly grounded 3 prong electrical outlet. Manual Start B. Fuel Valve - The fuel valve (B, Figure 3) is located under the fuel tank. It is used to turn the fuel supply off for out-of-season storage. C. Starter Handle - The starter handle (C, Figure 3) connects to a starter cord to manually start the engine. Pulling starter handle rapidly spins the engine crankshaft, cycles the engine, and generates the spark necessary for starting the engine. D. Primer Button - When pressed, the primer butt...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: