Wash hands after handling. WARNING: This product has a lamp which contains a very small amount of mercury. Dispose of it as required by local, state, or federal ordinances and regulations. For more information, see This entire user's guide is available on the enclosed CD as an Adobe Acrobat pdf file in the following languages: English, French, German, Italian, Norwegian, Portuguese, Spanish, Russian, Japanese, Korean, Traditional Chinese, Simplified Chinese. Before using this projector, please

If the maximum lamp time of 3000 hours is exceeded, the lamp will not light. The lamp must be replaced and the lamp timer reset before the projector will operate. Press the Menu Button, choose Settings, then choose Service, then Lamp Reset. At 3000 hours, the lamp will not light (Lamp Error LED will be Blinking). Press and Hold the "Volume +" and the "Volume -" buttons simultaneously for ten seconds. LED on keypad will reset, and you can power the lamp on. C160 1700 2000 Hours Press the Menu bu

An intuitive standardized keypad with everything users need, right on top of the projector. No need for directions, manuals, or IT support calls. With color-coded connections and cables, users can connect the projector in seconds. The keypad is grouped by function and simple to use— whether users want power, source selection or fine- tuning. And for further ease of operation, users can rely on intuitive, icon-based menus—they simply scroll and select. Standardized, interchangeable remotes mean s

• Do not place this device directly under sunlight or near heaters. • Do not place this device near water. • Keep the camera away from acid or alkali gas. • Do not place this visual presenter in humid, dusty, windy or vibrant locations. • The recommended operating environment is: • Temperature: 0.C - 45.C (32.F - 113.F) • Humidity: Less than 75% • Always unplug BEFORE cleaning the device. Use a damp soft-cloth for cleaning. Do not use volatile solvent. • When this equipment functions abnormally,

PROXIMA ASA 3 FLASH UPGRADE USER GUIDE IMPRESSION A10+/A9+/A8+ 2. INTRODUCTION This User Guide has been created to provide an easy to understand description on how to flash upgrade the SW on projectors that are prepared for this in the field. It describes the methodology and the correct software and hardware to use to perform flashing without any hassle. This User Guide does only apply to the following ASK products or their equivalents: Product : IMPRESSION A10+/A9+/A8+ 3. NEEDED MATERIAL When f

Connect cable (1) between the LCD panel and the computer. Use the Y- split on the computer end to connect the monitor. If you have a Macintosh computer, insert applicable adapters (2) and (3) as shown. Connect the power supply to the LCD panel (4). TO SET UP FROM THE REMOTE CONTROL: STEP OPERATION 1 Press RESET for default settings 2 Adjust TUNE for a stable image. *) 3 Position the image correctly using the four POSITION keys 5 Adjust CONTRAST and BRIGHTNESS as desired *) If a stable image is n

Passage d‘une source connectee a une autre source connectee. Conmutar entre las fuentes conectadas Commutazione fra le sorgenti collegate Alterna entre as fontes conectadas Bytt mellom de tilkoblede kildene Activates/deactivates on screen menu (OSD) Bildschirmmenu aktivieren/deaktivieren (OSD) Active/Desactive le menu sur l‘ecran (OSD) Activa/desactiva el menu en pantalla Attivazione/disattivazione del menu sullo schermo Ativa/desativa o menu da tela Aktiverer/deaktiverer menyvisning pa skjermen

Digital Light Processing is a trademark or registered trademark of Texas Instruments. InFocus, In Focus, and INFOCUS (stylized) are either registered trademarks or trademarks of InFocus Corporation in the United States and other countries. FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is ope