2 Lower the printer (scanner unit) to close it. 3 Press Power to turn the printer on, and then send your document to print. Troubleshooting 49 | support.dell.com Cover Open message The CoverOpenmessage displays when the printer (scanner unit) is open. NOTE: The operator Lower the printer (scanner unit). panel buttons do not function while the printer (scanner unit) is open. The message disappears, and the operator panel buttons function. Ink Low message An ink cartridge is running out of ink. Re

P3PC-E947-01EN fi-412PR Imprinter O OOp ppe eer rra aat tto oor rr’ ’’s ss G GGu uui iid dde ee Contents Introduction................................................................................................................................................. 1 1. Preparations............................................................................................................................................ 4 1.1. Inspect the Package Contents............................................

Print Cartridge Holder 3. Remove by pulling the tape seal that is affixed to the print cartridge holder and the paper guide. 4. Pinch slightly together the handles of the closing lever to release it from its cartridge tray holder and turn it upwards to open the tray holder. 5. Remove the new print cartridge from its pouch. 6. Remove protection tape from the print cartridge. ATTENTION Do not touch the metal part of the cartridge nor put the tape back on again. 7. Insert the print cartridge into t

Safety The scanning electron microscope is a relatively safe instrument.. You can do much more damage to it than it can do to you. When the electron beam is turned on, some x-rays are produced as a result of electron beam interaction with the sample, but these x-rays are of relatively low energy and do not escape the sample chamber. The instrument also produces some radio frequency energy. 2 JEOL JSM-6060LV SCANNING ELECTRON MICROSCOPE Background 2 The scanning electron microscope (SEM) is one o

Metrologic Instruments GmbH 90 Coles Road Dornierstrasse 2 Blackwood, NJ 08012 82178 Puchheim b. Customer Service: 1-800-ID-METRO Munich, Germany Tel: 609-228-8100 Tel: 49-89-89018-0 Fax: 609-228-6673 Fax: 49-89-89019-200 info@metrologic.com metrologic@europe.metrologic.com ASIA South America Metrologic Asia (PTE) Ltd. Metrologic Instruments 31, Kaki Bukit Road 3 Rua Florida, 1.821-5°Andar-Brooklin #05-08 Techlink CEP 04571-090, Sao Paulo-SP, Brasil Singapore 417818 Outside Brazil: Tel: 65-842-7

90 Coles Road Customer Service: 1- 800-ID-METRO Tel: 856-228-8100 Blackwood, NJ 08012-4683 Fax: 856-228- 6673 EUROPEAN HEADQUARTERS Email: info@metrologic.com Internet: metrologic.com Germany, Metrologic Instruments GmbH Tel: + 49 89 89019 0 Middle East and Africa Dornierstrasse 2 Fax: + 49 89 89019 200 82178 Puchheim b. Email: info@europe.metrologic.com Munich, Germany Germany Email: info@de.metrologic.com Spain Metrologic Eria lberica SL Tel: + 34 913 272 400 Julian Camarillo 29, D- 1 Fax: + 3

Reactivation Switch Turns the unit on after a timeout. Press the button from the bottom. Green and Red LEDs When the red LED is on, the laser is on. If the green LED flashes on, the scanner has read a bar code successfully. Communication to the host is complete when the receiver beeps. Infrared Object Sensor When a specified time has elapsed without any scanning, the unit will enter a “standby” mode. To reactivate the unit, remove the current object and present an object in front of the output w