Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
A Sales: +1-800-815-6908 | Service: +1-847-329-9875 | Fax: +1-847-410-0094 Email: sales@tekvend.com | Web: M200 Series Copier Controller Product Overview Technical Specifications Warranty The M200 Series Copier Controller accepts one coin to vend one copy. That coin can be a nickel (M205), dime (M210) or quarter (M225). The M200 Series Controller's housing - similar to a tall and narrow "breadbox" - allows for easy mounting on any of its three non-faceplate sides. The M200 Series Controller runs safely off the low signal voltages of its attached copier, and comes standard with both a copier specific sprig and bypass keyswitch. • Accommodates 5 VDC to 30 VDC signals from copier • Rugged tubular lock • $70 cashbox capacity • Dimensions: 16.5" x 5.75" x 6" • Weight: 12 lb The M200 is warrantied against manufacturing defects for a period of one year from date of shipment, to be determined by the serial number on the inside of its housing. To honor legitimate warranty claims, Advanced Technologies (TekVend) agrees to repair or replace at its discretion any M200 Series Controller found defective for manufacturing defects within the warranty period specified. Advanced Technologies (TekVend) additionally agrees to pay ground return shipping and insurance on these warranty repairs or replacements. Advanced Technologies (TekVend) cannot be responsible for any damage that occurs to product returned to it due to inadequate return shipment procedures. The shipper is responsible for ensuring that return shipment packaging is adequate and that the return shipment is adequately insured. Advanced Technologies (TekVend) does not warranty its product for damage caused by abusive use, vandalism, improper installation, and improper field repair. Installer is expected to use the original copier specific harness (sprig) supplied by Advanced Technologies (TekVend), and install the M200 on the originally specified copier, unless otherwise authorized. Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205. Advanced Technologies, Inc. Advanced Technologies, Inc. A Sales: +1-800-815-6908 | Service: +1-847-329-9875 | Fax: +1-847-410-0094 Email: sales@tekvend.com | Web: M6000 CreditVend. Copier / Printer Controller Product Overview The M6000 CreditVend. Copier / Printer Controller accepts nickels, dimes, quarters, and dollar coins to vend one or more images, depending on the amount of monetary value (credit) not yet spent. One price is available for all image types. The M6000 employs SmartCoin. technology to ensure that change is always available for every conceivable vending situation. Foreign coin mechanisms are available for select countries. Please contact us for foreign vending applications. Electromechanical Features • Two-line backlit user-friendly LCD display • Two pushbutton switches for programming and readouts • Red "message" light • Semi-gloss enamel finish resists marring, scratches • High security tubular housing lock • Bypass keyswitch for free copies • Bent coin return and change request plunger • Large coin return cup • Standard copier specific harness (sprig) included • Large cash box ($900 capacity) • Single board, single chip design • Three tube MDB changer (N, D, Q, $1 Coin, $41 capacity) • Optional five tube US-Canadian MDB changer (N, D, Q, $1 Coin, $82 maximum capacity) Software Features • SmartCoin. technology assures that change is always available for every conceivable vending situation • User-friendly instructions during vending, programming and readouts • Exact change and error messages indicated by blinking red LED • Seamless transition to and from exact change mode ensures that controller "works out of the box" • Resettable counter allows user to monitor copying by copies per original, or total copies made per vend cycle • AccumaVend. technology allows user to add monetary value "on the fly" i.e. while copies are being made • Time delay reset (TDR) ensures full copy imaging on last full copy credit • Anti-cheating timeout delay monitors for late copy counts after change return request made • Readouts show current (resettable) and cumulative (nonresettable) vend and bypass copies totals Technical Specifications • Controller uses safe low voltage (24 VAC) • Controller totally isolated from copier / printer • Controller works on most all copiers and with most copier signals • Canadian coin acceptance switch selectable with high capacity changer • Two key coin inventory system adds measure of security • Dimensions: 25.5" x 16" x 5.5" • Weight: 42 lb Warranty The M6000 is warrantied against manufacturing defects for a period of two years from date of shipment, to be determined by the serial number on its main board's Copyright © 2005 Advanced Technologies Inc. All rights reserved. V205. microchip. Warranties for components of the M6000, if different, supercede this microchip. Warranties for components of the M6000, if different, supercede this Specifi...