Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
All other trademarks are the property of their respective owners. © 2002 Bell & Howell G406-8610 Printed in Japan Note to users in the United States of America This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note to users in Canada This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing equipment standard entitled "Digital Apparatus", ICES-003 of the Department of Communications. Remarque concernant les utilisateurs au Canada Cet appareil numerique respecte les limites de bruits radioelectriques applicables aux appareils numeriques de Classe B prescrites dans la norme sur le materiel brouilleur : "Appareils Numeriques", NMB-003 edictee par le ministre des Communications. Important information This product can not be used in Europe because it does not comply with the CE (Conformite Europeenne). -i In accordance with IEC 417, this machine uses the following symbol for the main switch: means Push ON Push OFF - ii Precautions 1. Read all of these instructions and keep them for later reference. 2. Follow all warnings and instructions marked on the device. 3. Unplug this device from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. 4. Do not use this device near water. 5. Do not place this device on an unstable cart, stand, or table. The device could fall and suffer serious damage. 6. Slots and openings in the cabinet and the back or bottom are provided for ventilation; to ensure reliable operation of the device and protect it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the device on a bed, sofa, rug, or other similar surface. This device should never be placed near or over a radiator or heat register. This device should not be placed in a built-in installation unless proper ventilation is provided. 7. This device should be operated from the type of power source indicated on the marking label. If you are not sure of type of power available, contact your dealer or local power company. 8. This product is equipped with a 3-wire grounding-type plug, a plug having a third (grouding) pin. This plug will only fit into a grounding-type outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your outlet. Do not defeat the purpose of the grounding-type plug by removing its grounding pin. (This does not apply in countries in which a 2-wire, non- grounded type of plug is used.) 9. Do not place this device where the cord will be walked on. 10. If an extension cord is used with this product, make sure that the total of the ampere ratings on the devices plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total of all devices plugged into the wall outlet does not exceed 15 amperes. 11. Never push objects of any kind into this device through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product. 12. Except as specifically explained in the user's manual, do not attempt to service this device yourself. Opening or removing those covers that are marked "Do Not Remove" may expose you to dangerous voltage points or to other risks. Refer all servicing in those compartments to service personel. 13. Unplug this device from the wall outlet and refer servicing to qualified service personel under the following conditions; A. When the power cord or plug is damaged or frayed. - iii B. If liquid has been spilled into the product. C. If the device has been exposed to rain or water. D. If the device does not operate normally when the operating instructions are followed. Adjust only ...