Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Note . Default: Standard . Max. Copy Quantity The maximum copy quantity can be set between 1 and 999. Note . Default: 999 Sheets. . Tone: Original remains The beeper (key tone) sounds if you forget to remove originals after copying. Note . Default: On . If Panel Tone of User Tools (System Settings) is [Off], the beeper does not sound irrespective of the Tone: Original remains setting. See "Panel Tone" in “General Features”, General Settings Guide. . Job End Call You can choose whether or not the beeper sounds when copying is complete. Note . Default: On . If Panel Tone of User Tools (System Settings) settings is [On], the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred. General Features P.3/4 . Copy Function Key: F1-F5 You can assign frequently used functions to function keys F1 to F5. Accessing User Tools (Copier/Document Server Features) Note Reproduction Ratio P.1/2 . Default: • Copy Function Key: F1: 1 Sided>2 Sided: T to T • Copy Function Key: F2: 2 Sided: T to T>2 Sided: T to T • Copy Function Key: F3: 1 Sided>1 Sided Combine • Copy Function Key: F4: 1 Sided>1 Sided Combine: 4 originals • Copy Function Key: F5: Create Margin General Features P.4/4 . Document Server Storage Key: F1–F5 You can assign frequently used functions to function keys F1 to F5. You can also change the assigned functions. Note . Default • Document Server Storage Key: F1: 2 Sided Original Top to Top • Document Server Storage Key: F2: 1 Sided>1 Sided Combine • Document Server Storage Key: F3: 1 Sided>1 Sided Combine: 4 originals • Document Server Storage Key: F4: 1 Sided>1 Sided Combine: 8 originals • Document Server Storage Key: F5: Create Margin . Shortcut R/E You can register up to three frequently used Reduce/Enlarge ratios other than the fixed Reduce/Enlarge ratio and have them shown on the initial display. You can also change registered Reduce/Enlarge ratios. If no Reduce/Enlarge ratio has been set when selecting [Shortcut R / E 1], [Shortcut R / E 2], or [Shortcut R / E 3], enter the desired Reduce/Enlarge ratio using the number keys. . Enlarge 1-5 You can customize available enlargement ratios by pressing [Reduce / Enlarge ] followed by [Enlarge]. Enlarge1 Enlarge2 Enlarge3 Enlarge4 Enlarge5 Note . Default: • Metric version: •Enlarge 1: 115% •Enlarge 2: 122% •Enlarge 3: 141% •Enlarge 4: 200% •Enlarge 5: 400% • Inch version: •Enlarge 1: 121% •Enlarge 2: 129% •Enlarge 3: 155% •Enlarge 4: 200% •Enlarge 5: 400% User Tools (Copier/Document Server Features) . When selecting [User Enlrg. Ratio], enter a ratio using the number keys (from 101 to 400%). . Priority Setting: Enlarge You can set the ratio with priority when [Reduce / Enlarge] is pressed, followed by [Enlarge]. Note . Default: •Metric version: 141% • Inch version: 155% Reproduction Ratio P.2/2 . Reduce 1-6 You can customize available reduction ratios by pressing [Reduce / Enlarge] followed by [Reduce]. Reduce1 Reduce2 Reduce3 Reduce4 Reduce5 Reduce6 Note . Default: •Metric version: • Reduce 1: 25% • Reduce 2: 50% • Reduce 3: 65% • Reduce 4: 71% • Reduce 5: 75% • Reduce 6: 82% • Inch version: • Reduce 1: 25% • Reduce 2: 50% • Reduce 3: 65% • Reduce 4: 73% • Reduce 5: 78% • Reduce 6: 85% . When selecting [User Redc.Ratio], enter a ratio using the number keys (from 25 to 99%). . Priority Setting: Reduce You can set the ratio with priority when [Reduce / Enlarge] is pressed, followed by [Reduce]. Note . Default: • Metric version: 71% • Inch version: 73% . Ratio for Create Margin You can set a Reduce/Enlarge ratio when registering Create Margin in a shortcut key. Note . Default: 93% . R/E Priority Specifies which tab is given priority on the display panel when [Reduce / Enlarge] is pressed. Note . Default: Reduce Edit P.1/2 Note . Enter the width of the binding margin with the number keys as follows: • Metric version: 0–30 mm (in increments of 1 mm) • Inch version: 0"–1.2" (in increments of 0.1 inch) . Enter the width of the erased margin with the number keys as follows: • Metric version: 2–99 mm (in increments of 1 mm) • Inch version: 0.1"–3.9" (in increments of 0.1 inch) Accessing User Tools (Copier/Document Server Features) . Front Margin: Left/Right You can specify left and right margins on the front side of copies in Margin Adjustment mode. Note . Default: •Metric version: Left 5 mm • Inch version: Left 0.2" . Back Margin: Left/Right You can specify left and right margins on the back side of copies in Margin Adjustment mode. Note . Default: •Metric version: Right 5 mm • Inch version: Right 0.2" . Front Margin: Top/Bottom You can specify top and bottom margins on the front side of copies in Margin Adjustment mode. Note . Default: • Metric version: Top/Bottom 0 mm • Inch version: Top/Bottom 0.0" . Back Margin: Top/Bottom You can specify top and bottom margins on the back side of copies in Margin Adjustment mode. Note . Default: • Metric version: Top/Bottom 0 mm ...
Эта инструкция также подходит к моделям:Сканеры/копиры/мфу - LD245 (2.14 mb)