Оценок - 2, средний балл: 4.5
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
• Adobe Photoshop CD-ROM (with only CanoScan N1240U) • Quick Start Guide (this guide) • Additional documents Unlock the Scanning Unit Photoshop Unlock the scanner before connecting to the computer. If it is left locked, a malfunction or other problem may occur. 1. Peel the seals off the scanner. 2. Gently turn the scanner over. 3. Push the lock switch toward the unlock mark. Lock Switch Unlock Mark 4. Return the scanner to a horizontal position. N670U/N676U/N1240U Quick Start Guide 1 Connect the Scanner Confirm that the power switches for the computer and other connected devices are off. Connect the scanner to the computer with the supplied USB interface cable. Small Square Connector USB Interface Cable Wide Flat Connector USB Interface Cable Small Square Connector Wide Flat Connector • The scanner does not have a power switch. The power is activated as soon as the computer is turned on. Proceed to the next page. Jump to page 6. • The screen shots common to both Windows and Macintosh used in this manual are from the Windows platform, unless otherwise noted. • The scanner used for the screen shot in this manual is N1240U. Scanner name shown in screen shots will vary depending on the model purchased. 2 N670U/N676U/N1240U Quick Start Guide Install the Software 1. Install the Driver Software Install the Driver Software (ScanGear CS-U) with the following procedure. For Windows 98/2000 Professional users Jump to page 4. Windows Millennium Edition 1. Turn the computer on. 2. The [Add New Hardware Wizard] dialog box will appear. Confirm that “Automatic search for a better driver (Recommended)” is selected. 3. Place the CanoScan Setup Utility CD-ROM in the drive. 4. Wait for 10 seconds, then click [Next]. The driver will begin to install. 5. When “Windows has finished installing the new hardware device.” appears, click [Finish]. Jump to page 5. N670U/N676U/N1240U Quick Start Guide 3 Windows 98 / 2000 Professional Install the Software The screen shots in this section are from Windows 98. 1. Turn the computer on. 2. When [Add New Hardware Wizard] appears, click [Next]. 3. Confirm that “Search for the best driver for your device. (Recommended)” is selected and click [Next]. 4. Place the CanoScan Setup Utility CD-ROM in the drive. 5. Confirm that “CD-ROM drive” is selected, wait for 10 seconds, and then click [Next]. If “Driver Not Found” appears, click [Back] and repeat this step. 6. When “CanoScan N670U/N676U” or “CanoScan N1240U” appears, click [Next]. The driver will begin to install. Windows 98 Users If prompted to insert the Windows 98 CD-ROM, follow the instructions below. a. Click [OK]. b. Click [Browse]. c. Select the CD-ROM drive and click [OK]. d. Click [OK]. Windows 2000 Professional Users If the message box “The software you are about to install does not contain a Microsoft digital signature.” appears, continue installation by clicking [Yes]. 7. Click [Finish]. 4 N670U/N676U/N1240U Quick Start Guide Install the Software 2. Install the Application Software List of Software to Be Installed (approx. total of 209MB) • ScanGear Toolbox (10 MB) -Scanning Utility Program • ArcSoft PhotoStudio 2000 (40 MB) -Image Editing Program • ArcSoft PhotoBase (60 MB) -Photo Album Program • ScanSoft OmniPage Pro (75 MB) -OCR (Optical Character Recognition) Program • Adobe Acrobat Reader (24 MB) -Electronic Manual Viewer Program Installation Procedures 1. The CanoScan Setup Utility main menu will appear. If the CanoScan Setup Utility main menu does not automatically appears, eject the CD-ROM and re-insert it. 2. Click [Install the Software]. [Software User License Agreement] is confirmed. Click [Yes] if you accept the agreement. The [Install] window will display. 3. Click [Start Installation]. 4. The installation procedure will start. Follow the on-screen message prompts and click [Yes] or [Next] to continue the installation. 5. When the installation is complete, click [Yes]. The computer will restart. 6. After Windows restarts, remove the CD-ROM from the drive and store it in a safe place. Jump to page 7. N670U/N676U/N1240U Quick Start Guide 5 Install the Software List of Software to Be Installed (approx. total of 94MB) • ScanGear CS-U (10 MB) -Driver Program • ScanGear Toolbox (10 MB) -Scanning Utility Program • ArcSoft PhotoStudio (10 MB) -Image Editing Program • ArcSoft PhotoBase (10 MB) -Photo Album Program • ScanSoft OmniPage SE (30 MB) -OCR (Optical Character Recognition) Program • Adobe Acrobat Reader (24 MB) -Electronic Manual Viewer Program Installation Procedures 1. Turn the computer on. When “...Would you like to look for these drivers over the internet?” appears, click [Cancel]. 2. Place the CanoScan Setup Utility CD-ROM in the drive. The CanoScan Setup Utility main menu will appear. If no window displays, double-click the CD-ROM icon, then the Setup icon. 3. Click [Install the Software]. [Software User License Agreement] is confirmed. Click [Yes] if you accept the agreement. The [Install] window will display. 4. C...
нет напряжения на сканере CanoScan670U купленного в Мурманске до 2016. Ищем инструкцию пользователя