Оценок - 2, средний балл: 3
(
)
)
|
Фрагмент инструкции
This may cause a paper jam or skew. Loading a Document 4 Adjust the document guides to fit the size of the documents to be scanned. • Make sure to properly align the documents to the document guides. 5 When using legal paper, pull out the extension tray from the document tray as shown in the illustration. Caution : • For thin or thick paper, scan the document using single paper feed. Also, remove the document from the exit tray after it is scanned. • The scanner will accept 13 to 27 lb paper for continuous scanning and 11 to 34 lb paper for a single scan. • You can load up to 80 sheets of 20 lb paper (limit mark of the document guide). Never allow the amount of documents in the tray to exceed the fill indicator. Reduce the number of documents in the tray if they are thick, creased, or curled. • Be sure to remove the document from the exit tray after it is scanned. • In cases where very fragile documents are to be scanned, it is recommended to make a copy and use the copy to scan into the unit. Types of Documents to Avoid : • OHP sheets, other plastic film, cloth, or metallic sheets. • Paper with irregularities such as tabs, staples, paste etc. • Documents with wet ink. • Thick or irregular documents such as envelopes, ups, etc. • Copying paper such as carbons or carbonless paper. (Chemically treated carbonless forms) Note : Scanning chemically treated paper will result in premature wear of paper feed roller. • Damaged or wrinkled documents. • Unusually shaped documents. • Tracing paper. Note: Use only Single Scan mode for coated documents or photos. 12 Clearing Paper Jams Torn documents, thin documents or documents that are creased at the leading edge may cause paper jamming. If a paper jam occurs (the lamp "Bv* to indicate "Paper jam" will light on the Display Panel), remove the jammed sheet according to the following procedure. Removing paper jams from the scanner Remove the exit tray, document tray and open the scanning section cover by inserting your finger into the cover release and gently pulling up the tab while pushing down the cover slightly. • If the paper cannot be removed by pulling it forward Open the cover and then open the scanning section cover inside by pulling the tab toward the front. Cleaning the Unit Outside of the Unit: • at least once a month y Turn the power OFF. ^ Clean the cover with a soft cloth. 3 Remove dirt and dust from the fan exhaust vent with a brush. Inside of the Scanner: • Please clean the unit once a month, when 50,000 sheets or more are fed into the unit, or at the earliest opportunity. • When you experience paper jamming or multiple sheet feeding problems, follow steps 1 through 4 for cleaning the rollers and paper sensors. • When black vertical lines appear on the scanned image, please follow steps 1 and 5 for cleaning the reading element. ^ Turn the power OFF. 14 Cleaning the Unit 3When the parts are especially dirty, use the included "Roller Cleaning Paper", wipe clean all of the dirty parts while rotating the roller in the direction of the arrows shown in the figure. • When feeding of multiple sheets occurs often clean the rollers (parts (D, © and (D) with the included roller cleaning paper. 4 Clean the paper sensors shown in fig. 1, using a dry, clean cloth. 5 When the scanned image has vertical black lines, wipe the glass and white reference plate clean using a dry, clean cloth as shown in the figure on the right. • When especially dirty, use the included roller cleaning paper to wipe clean. Note for the roller cleaning paper; Open the bag by the dotted line and take the roller cleaning paper out. (See fig. 5.) • If the opened bag is left for a period of time, the alcohol will vaporize. Please use the roller cleaning paper immediately after opening the bag. j&The roller cleaning paper (Model No. KV-SS03) is available at the dealer where you purchased your scanner. fig. 5 15 Repacking Instructions It is highly recommended that you keep the original carton and ALL packing materials. Should you need to transport or ship your scanner, please follow these instructions. Please Note: • Please use the original carton and all of the original packing materials. If you do not have the original packing material, these are available from Panasonic. Please refer to your servicing dealer, or call 1-800-833-9626 (KV-SV50/KV-SV55 only). • Improper repacking of the scanner may result in a service charge to repair the unit. • The scanner should be handled in the upright (vertical) position. Material Required : • Original Scanner Carton & Packing Materials • Shipping Tape and Scissors Disconnect your scanner from the electrical outlet and the interface cable. 2 Close the scanner stands into their shipping positions. ^ Packing the scanner. 16 Troubleshooting If a problem occurs while the unit is being used, first check the following items. If the unit still malfunctions, switch it OFF, and call service. Symptom Po...