Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Also, any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. English WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE. THE SOCKET-OUTLET MUST BE NEAR THIS EQUIPMENT AND MUST BE EASILY ACCESSIBLE. Français Avertissement: Pour éviter tout risque d'incendie ou de choc électrique, ne pas soumettre cet appareil à la pluie ou à l'humidité._ "La prise secteur devra se trouver à proximité de l'appareil et être facilement accessible." 3 Notice For roller cleaning paper Before using the roller cleaning paper, please read these instructions completely. Keep these instructions for future reference. English WARNING • Do not drink or inhale the roller cleaning paper fluid. • The roller cleaning paper may be harmful to sensitive skin, so please use protective gloves. • Do not use the roller cleaning paper near a heater or open flame. • Do not store the roller cleaning paper in direct sunlight or in a place over 40 °C (104 °F). • Only use the roller cleaning paper to clean the rollers and scanning area. • If you need more information about the roller cleaning paper, please refer to the Material Safety Data Sheet (MSDS). KEEP AWAY FROM FIRE. Français Avertissement • Ne pas boire ni respirer le liquide du papier de nettoyage de rouleaux fourni. • Le papier de nettoyage de rouleaux pouvant être néfaste pour les peaux sensibles, utiliser des gants de protection. • Ne pas utiliser le papier de nettoyage de rouleaux à proximité d'un feu ou d'une flamme vive. • Ne pas ranger le papier de nettoyage de rouleaux en plein soleil ni à une température dépassant 40 °C (104 °F). • Utiliser le papier de nettoyage de rouleaux exclusivement pour le nettoyage des rouleaux et de la surface de balayage. • Pour tout renseignement complémentaire sur le papier de nettoyage de rouleaux, voir la feuille de données sur la sécurité du matériel. NE PAS APPROCHER DU FEU. 4 Precautions The following precautions are recommended to extend the life of the unit. Do not place any liquids near the unit. — Accidental spillage of a liquid into the unit may cause severe damage. If this occurs, unplug the power cord and call service. 0 Do not place books, paper, or other items on the unit. 0 Do not operate the unit with covers open. 0 Do not continue to plug the power cord if the unit is not used for an extended period. 0 Do not place the unit on an uneven or unstable surface. Do not place the unit in an area where there is a lot of smoke, dust, chemical fumes or vibration. 0 Do not disassemble the unit. 0 • Special care should be taken to protect the unit if it is used in a less than optimum environment such as a machine shop or a dusty or sandy area. Precautions Operating Environment Do not subject the unit the following conditions. Do not place the unit in direct sunlight or in a cold draft. Cold Do not use the unit in a vertical position. Do not place the unit near a heating appliance or an air conditioning vent. Do not place the unit in a room with extremely high or low humidity. Do not place the unit near other appliances. Do not place the unit on a carpet. (Static electricity can cause the unit to malfunction) 0 Do not drink or inhale the included roller cleaning paper fluid. The roller cleaning paper may be harmful to sensitive skin, so please use protective gloves. Do not use the roller cleaning paper near a heater or open flame. • This may cause a fire. 0 • Power Source • Use a voltage level which does not vary more than ±10% from the voltage level marked on the nameplate (located on the rear of the scanner). • Do not use an extension cord. • This scanner should be connected to a grounded outlet. • Do not use a line conditioner, transient suppressor or surge protector. Component Identification Power indicator — Display Panel « = \ POWER © Document exit slot Stand Document feed slot Exit tray sheet Power switch Scanning section cover release Open the cover by this release if a paper jam occurs. Extension tray Document guide 7 Minimum Space and Installing the Stand ■Minimum space Be sure to maintain the recommended space requirements for proper ventilation. ■installing the stand ^ Lift the unit. • Do not hold the unit by the document feed slot. 2 Turn the four feet until they appear as in the illustration. 8 Installing the Document Tray and the Exit Tray 7 Align both sides of the tray with the document feed slot, then firmly insert the tray into the slot using both hands until a "click" is heard. Caution : Before installing the document tray, be sure to perform the following procedure. ® Connect the power cord. © Turn the power switch on and initialize the unit for approximately 15 seconds. 2 Insert both ends of the exit tray into the holes at the sides of the document exit slot. 3 Remove the protective cover from the adhesive strip on...