Оценок - 5, средний балл: 4.6
(
)
)
|
Фрагмент инструкции
• For details about the bundled software programs, read the Scanning Guide or the User’s Guide (PDF format manual) for each software program on the CanoScan Setup Utility CD-ROM. 14 Using the USB 2.0 Interface (On Windows) Using the USB 2.0 Interface (On Windows) To Switch to USB 2.0 If your computer is equipped with USB 1.1, you can switch to the USB 2.0 environment for faster scanning by purchasing and installing one of the USB 2.0 expansion cards available on the market. Compatible USB Expansion Cards/Hubs Please use one the following USB expansion cards/hubs that have been verified by Canon for compatibility. Expansion Cards • Adaptec USB2connect 5100: PCI bus • Adaptec USB2connect 3100: PCI bus • Adaptec USB2connect 2000LP: PCI bus • Adaptec DuoConnect: PCI bus Hubs • Adaptec XHUB4 • Adaptec XHUB4PLUS • Adaptec XHUB7PLUS For installation procedures, please read the instructions that accompany the USB expansion card/hub. Confirming the USB Version Use the following procedures to confirm whether your computer is equipped with a USB version 1.1 or 2.0 interface. 1 Start ScanGear CS. 2 Click the information icon in the upper portion of the ScanGear CS window. 3 Read the contents of the Interface category in the displayed window. USB 1.1 will show as “USB 1.1” and USB 2.0 as “USB 2.0.” 4 Click the close box to close the window. Troubleshooting the USB2.0 Hi-Speed Interface If the scanner is not operating correctly via the USB2.0 Hi-Speed interface, follow the steps below to troubleshoot it. 1 Ensure that you use the USB cable supplied with the scanner. 2 Connect the scanner directly to a USB port on the computer, not through a USB hub. 3 With the Microsoft USB 2.0 driver, if the scanner is not recognized by the computer after installing ScanGear CS: • Detach the AC adapter and attach it again. • Detach the USB cable and attach it again. 4 Use the following procedures to confirm that the computer correctly recognizes the USB expansion card and the scanner. 1. Open the Windows [Device Manager] and confirm that your scanner name appears below the [Imaging Device] category. 2. Confirm that [Adaptec AUA-xxxx], [NEC PCI to USB Enhanced Host Controller] or [Intel PCI to USB Enhanced Host Controller] appears below the [USB (Universal Serial Bus) Controllers] category. 3. Confirm that the USB expansion card is correctly installed into the computer and that the scanner is attached to its port. 4. If you use more than two devices via USB2.0 Hi-Speed interface, try to disconnect other devices than the scanner. 15 Specifications Specifications CanoScan 3200 CanoScan 3200F Scanner Type Flatbed Scanning Element CCD 6-line color Light Source Cold cathode fluorescent lamp Film Adapter Unit -Standard equipped Optical Resolution 1200 x 2400 dpi Selectable Resolution 25 - 9600 dpi (ScanGear CS) Scanning Bit Depth Color 16 bit input / 16 bit or 8 bit output for each color (RGB) Grayscale 16 bit input / 16 bit or 8 bit output *1 Scanning Speed*2 (Photo or Document) Color 2 msec./line (600 dpi), 3.6 msec./line (1200 dpi) Grayscale, B&W 2 msec./line (600 dpi), 3.6 msec./line (1200 dpi) Scanning Speed*2 (Film) Color, GrayScale, B&W -8 - 128 msec./line (1200 dpi) Preview Speed*3 Approximately 2.6 sec. Interface USB 2.0 Hi-Speed, USB (USB 1.1 equivalent) Maximum Document Size A4/Letter: 216 x 297 mm (8.5 x 11.7 in.) Film Type/Number of Frames - 35 mm strip (negative/ positive)/1 frame - 35 mm slide (negative/ positive)/1 frame Scanner Buttons 4 buttons: COPY, SCAN, FILE, E-MAIL Operating Range Temperature 10°C to 35°C (50°F to 95°F) Humidity 10% to 90% RH, 20% to 80% RH when scanning film (without condensation formation) Power Requirements AC adapter (100/120/230/240V) *4 Power Consumption In operation: 15 watts maximum, Stand-by: 5.3 watts (Using supplied AC adapter) Maximum Exterior Dimensions 259 x 474.7 x 74.7 mm (10.2 x 18.7 x 2.9 in.) Weight Approximately 2.5 kg (5.5 lbs.) Approximately 2.7 kg (5.9 lbs.) *1 16 bit output supports only for film scanning. *2 USB 2.0 Hi-Speed mode. Transfer time to computer is not included. *3 Calibration processing time is not included. *4 Type of AC adapter depends on the area where the scanner is purchased. • Specifications are subject to change without notice. • Before you upgrade to Windows XP from Windows 98/Me/2000, you must uninstall ScanGear CS and CanoScan Toolbox using the “Uninstall the Software” menu of the CanoScan Setup Utility CD-ROM. The scanner may not work if you upgrade to Windows XP with these programs still installed. After upgrading to Windows XP, reinstall ScanGear CS and CanoScan Toolbox according to the steps on page 3. For details, please read the “Troubleshooting” section of the Scanning Guide (HTML format manual). 16 System Information System Information This form should be used to record the operating environment for the purchased scanner. If any problems occur with the scanner, you will need this information when you contact our Customer Support Help Desk. Be sure to...
Эта инструкция также подходит к моделям:Сканеры/копиры/мфу - CanoScan 3200F (2.15 mb)