Оценок - 3, средний балл: 4.7
(
)
)
|
Фото и характеристики Toshiba E-STUDIO 282 |
Фрагмент инструкции
4 • The GENERAL menu is displayed. To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. .. P.82 2 Press the [CLOCK] button. • The CLOCK menu is displayed. 3 Press the [DATE/TIME] button. • If you want to change the date format only, skip to step 10. • When you press the [DATE/TIME] button, the DATE/TIME screen is displayed. 90 4.SETTING ITEMS (ADMIN) 4 Highlight the section that you want to edit using the arrow buttons, and enter the number using the digital keys. • The “DAY” section describes the day of week with a number. The numbers corresponding to the days of week as following: 1: Sun, 2: Mon, 3:Tue, 4: Wed, 5: Thu, 6:Fri, 7: Sat 5 To enable the daylight saving system, press the button. • The daylight saving button is highlighted. 6 Press the [ENTER] button. • Returns you to the CLOCK menu. 7 Press the [DATE FORMAT] button. 4 • The DATE FORMAT screen is displayed. 8 Press the desired date format button. 91 2.SETTING GENERAL FUNCTIONS (Cont.) Setting the Weekly Timer Using the built-in weekly timer, you can have this equipment automatically turned ON and OFF at specified times. For instance, you can set the timer for the starting time and closing time of your office so that the copier will automatically turn itself ON and OFF at those specified times. You can turn on the power simply pressing the [START] button on the control panel when the device is OFF-mode by the weekly timer. If you leave the device for a while after the latest operation, it will automatically return to OFF-mode again by the weekly timer. 4 When the power switch is turned off, the weekly timer does not work. 1 Press the [GENERAL] button in the ADMIN menu. • The GENERAL menu is displayed. To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. .. P.82 2 Press the [ENERGY SAVER] button. • The ENERGY SAVER menu is displayed. 92 4.SETTING ITEMS (ADMIN) 3 Press the [WEEKLY TIMER] button. • The TIMER screen is displayed. 4 Check the settings on the display, and if corrections are necessary, press the [CHANGE] button. 4 • If no correction is needed, press the [ENTER] button and complete the operation. 5 Press the [<-Sun] or [Sat->] buttons to switch the days of the week. Then in the “ON” field, enter the hour and minute that the device will automatically turn on the power using the digital keys and press the [SET] button to set each entry. • If you want to clear entered time to retype it, press the [CLEAR] button on the Control Panel. • After pressing the [SET] button, the “OFF” field will be highlighted. 93 2.SETTING GENERAL FUNCTIONS (Cont.) 6 In the “OFF” field, enter the hour and minute that the device will automatically turn off the power using the digital keys and press the [SET] button to set each entry. 4 • If you want to clear entered time to retype it, press the [CLEAR] button on the Control Panel. • If you want to return to the “OFF” field to retype it, press the [RESET] button. • If you want this equipment not to be turned ON, enter the same time in both “ON” and “OFF” field. • If you want to disable the Weekly Timer, enter “00:00” for the ON time and “24:00” for the OFF time. 7 Press the [ENTER] button at the bottom of the touch panel. 94 4.SETTING ITEMS (ADMIN) Setting the Auto Power Save Mode This function allows this equipment automatically to go into the energy saving mode (unnecessary electricity is cut off at standby) if it is left inactive for a certain period of time. 1 Press the [GENERAL] button in the ADMIN menu. 4• The GENERAL menu is displayed. To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. .. P.82 2 Press the [ENERGY SAVER] button. • The ENERGY SAVER menu is displayed. 3 Press the [AUTO POWER SAVE] button. • The AUTO POWER SAVE screen is displayed. 95 2.SETTING GENERAL FUNCTIONS (Cont.) 4 Press the desired period of time (in minutes) that this equipment waits before the Automatic Power Save mode is activated. 4• The Auto Power Save mode setting is completed. 96 4.SETTING ITEMS (ADMIN) Setting the Sleep Mode This function allows this equipment goes into the sleep mode that stands by with the minimum power consumption. 1 Press the [GENERAL] button in the ADMIN menu. 4• The GENERAL menu is displayed. To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. .. P.82 2 Press the [ENERGY SAVER] button. • The ENERGY SAVER menu is displayed. 3 Press the [SLEEP MODE] button. • The SLEEP MODE screen is displayed. 97 2.SETTING GENERAL FUNCTIONS (Cont.) 4 Press the desired period of time (in minutes) that this equipment waits before the Automatic Shut Off mode is activated. 4• The Sleep mode setting is completed. 98 4.SETTING ITEMS (ADMIN) Setting the Drawer Setup Pop-Up When this functions is enabled, the message to ask users to change the paper size setting every time you open the drawer. 1 Press the [GENERAL] button. 4• The GENERAL menu is displayed. To display the ADMIN menu, see “1.ENTERING TO ADMIN MENU”. .. P.82 2 Press the [DRAWER SET POP-UP] button. • The DRAWER SET POP-UP screen is displayed. 3...
Эта инструкция также подходит к моделям:Сканеры/копиры/мфу - E-STUDIO 232 (2.25 mb)