Оценок - 4, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
The other two pairs are FFFF and FFFF. With the label, AG15TA81, it would look as follows after the character conversion: BG25TB82. The A characters were converted to the B character and the 1 characters were converted to the numeral 2 character. Nothing is done with the last two character pairs, since they are all FF. To set Character Conversion: 1. Scan the START/END bar code. 2. Scan the Character Conversion bar code. 3. Determine the desired string. Up to sixteen positions can be determined as in the above example. Next, turn to the ASCII Chart on the inside back cover of this manual and find the equivalent hex digits needed to fulfill the string. The positions not used must be filled with the character ‘F’. NOTE 4. Turn to Appendix C, Alpha-Numeric Pad and scan the bar codes representing the hex characters determined in the previous step. When the last character is scanned, the scanner will sound a triple beep. 5. Scan the START/END bar code to exit Programming Mode. START / END PROGRAMMING bar codes DEFAULT SETTING FOR THIS FEATURE: FFFFFFFFFFFFFFFF hex (no conversion) Character Conversion Product Reference Guide Data Editing NOTES MagellanTM 3200VSi Chapter 6 Symbologies The scanner supports the following symbologies (bar code types). Options for each symbology are included in this chapter. • UPC-A • Code 39 • Code 32 Italian • UPC-E Pharmacode • EAN-13 • Code 128 • EAN-8 • Interleaved 2 of 5 • GS1 DataBar Omnidirectional / • Codabar Stacked Omnidirectional • GS1 DataBar Expanded / • Code 93 Expanded Stacked • GS1 DataBar Limited • Factory Defaults— for the standard RS-232 interface are indicated in bold text throughout this section. Reference Appendix D, Factory Default Settings for default exceptions for your interface. UPC-A Disable/Enable UPC-A When disabled, the scanner will not read UPC-A bar codes. START / END PROGRAMMING bar codes Disable UPC-A Enable UPC-A DEFAULT Product Reference Guide Symbologies UPC-A — continued Check Digit Transmission Enable this option to transmit the check digit along with UPC-A bar code data. START / END PROGRAMMING bar codes . Don’t Send Check Digit Send Check Digit DEFAULT Number System Transmission This feature enables/disables transmission of UPC-A System Number. START / END PROGRAMMING bar codes Disable Number System Transmission Enable Number System Transmission DEFAULT MagellanTM 3200VSi UPC-A UPC-A — continued Expand UPC-A to EAN-13 Expands UPC-A data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN-13. START / END PROGRAMMING bar codes Don’t Expand to EAN-13 DEFAULT Expand to EAN-13 Product Reference Guide Symbologies UPC-E The following options apply to the UPC-E symbology. Disable/Enable UPC-E When disabled, the scanner will not read UPC-E bar codes. START / END PROGRAMMING bar codes Disable UPC-E Enable UPC-E DEFAULT Check Digit Transmission Enable this option to transmit the check digit along with UPC-E bar code data. START / END PROGRAMMING bar codes Don’t Send Check Digit Send Check Digit DEFAULT MagellanTM 3200VSi UPC-E UPC-E — continued Number System Digit The Number System Digit (NSD) which is always a zero (0) in the leading position can be optionally included (or not) with scanned bar code data. START / END PROGRAMMING bar codes Exclude Number System Digit DEFAULT Include Number System Digit .02 801 Expand to UPC-E to UPC-A Enables/disables expansion of UPC-E labels to UPC-A. Selecting this feature also changes the symbology ID to match those required for UPC-A. START / END PROGRAMMING bar codes Don’t Expand UPC-E to UPC-A DEFAULT Expand UPC-E to UPC-A Product Reference Guide Symbologies UPC-E — continued Expand UPC-E to EAN13 Enables/disables expansion of UPC-E labels to EAN-13. Selecting this feature also changes the symbology ID to match those required for EAN-13. START / END PROGRAMMING bar codes Don’t Expand UPC-E to EAN-13 DEFAULT Expand UPC-E to EAN-13 MagellanTM 3200VSi UPC-E GTIN The following options apply to the GTIN label data format. Expand UPC/EAN to GTIN When this feature is enabled, the scanner will translate UPC/EAN labels to the 14 digit GTIN format. START / END PROGRAMMING bar codes Don’t Expand to GTIN DEFAULT Expand to GTIN Product Reference Guide Symbologies EAN-13 The following options apply to the EAN-13 symbology. Disable/Enable EAN-13 When disabled, the scanner will not read EAN-13 bar codes. START / END PROGRAMMING bar codes Disable EAN-13 Enable EAN-13 DEFAULT Check Digit Transmission Enable this option to transmit the check digit along with EAN-13 bar code data. START / END PROGRAMMING bar codes Don’t Send Check Digit Send Check Digit DEFAULT MagellanTM 3200VSi EAN-13 EAN-13 — continued EAN-13 Flag 1 Character Enables/disables transmission of an EAN/JAN13 Flag1 character. START / END PROGRAMMING bar codes Don’t Transmit EAN-13 Flag 1 Char Transmit EAN-13 Flag 1 Char DEFAULT ISBN When enabled, this feature truncates the leading three digits from labels tha...