Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA MANUFACTURING, INC. © Copyright Simplicity Manufacturing, 2007 Inc. All Rights Reserved. Printed In USA. TP 400-4530-00-AT-SMA Mfg. No. Description Attachment 1695299 54" Turbo Blower Part No.: 1734809 Table Of Contents s PRODUCT COMPONENTS PAGES Mower Driven Vac Group ..................................................................................................................................... Torque Specification Chart .......

3 7090167 1 CAPSCREW, 3/8-24 x 2 Hex Head, GR5 4 3020234 1 WELDMENT, Intake Baffle 5 7091511 8 NUT, 5/16-18 Hex, GR5 or B 6 7091315 10 WASHER, 5/16 Split Lock 7 3024507 1 DEFLECTOR, Side Air 8 7090188 8 WASHER, .34 x .69 x .08 Flat 9 7013010 1 DECAL, Danger, Cut Finger 10 3024508 1 WELDMENT, Door Front/Side Discharge 11 7091495 1 CAPSCREW, 1/4-20 x 3/4 Hex Head, GR5 12 7027223 1 WASHER, .263 x .375 x .062 Split Lock 13 3031014 1 BUSHING, Steel Sleeve .250 ID x .375 OD x .25 Long 14 3071782 1 SPR

5.5HP Product 1694500 Mfg. No. 6.5HP Product 1694581 Classic Leaf Blower Series Walk-Behind Blowers Description Leaf Blower, Walk-Behind 5.5HP, Briggs & Stratton Description Leaf Blower, Walk-Behind 6.5HP, Briggs & Stratton Rev. 04/2004 TP 400-4083-00-YB-SMA Table Of Contents s PRODUCT COMPONENTS PAGES Illustrated Parts List .............................................................................................................................................. Torque Specification Chart ...

7078091 (I.R. - 09/14/04) (Part # 7085911) 1 preliminaries Congratulations! You have just purchased one of the finest pieces of outdoor power equipment on the market today. If properly cared for, your new blower will provide years of dependable service. Please read and follow this instruction manual carefully in order to get the most out of your new equipment. As you carefully unpack your unit, you will find the following items: 1 Blower Unit 1 Handle Assembly including: 1 – Upper Handle with fo

Fasten with two 5/16-18 hex nuts and split lock washers. Note: Deflector should be angled downward. HANDLE ASSEMBLY • The upper handles are shipped in the folded storage position. To unfold, loosen two handle knobs and rotate up to the operating position. The upper handles are secured with four knobs. Insert two 5/16-18 x 2 curved head bolts through the handles directly below the two shipping knobs. Place one internal tooth lock washer on each of the bolts. Thread knobs onto curved head bolts. T

• Be alert and turn unit off if children enter the area. • Before and during reverse operation, look behind and down for small children. • Never allow children to operate the unit. • Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision. EMISSIONS • Engine exhaust from this product contains chemicals known, in certain quantities, to cause cancer, birth defects, or other reproductive harm. • Look for the relevant Emissions Durability Period and Air