TWIN LINE TAP FEED HEAD KIT ITEM PART NO. DESCRIPTION _ 6-8037 KIT, .095 L.H. Twin Line Tap Feed Head (Includes Items 1 thru 7) 1 4-2081 HEAD, Twin Line Bump, L.H. (Includes Items 2 thru 6) 2 4-2073 ASSEMBLY, Hub 3 4-2074 SPRING 4 4-2082 ASSEMBLY, Spool & Line 5 2-1971 KNOB, Bump 6 4-2083 BOLT, Slotted Hex Flange, L.H. 7 1-8784 CARD/Parts (Not Illustrated) 1 5 Section I - TRIMMER ACCESSORIES BRUSH BLADE CONVERSION KIT WITH METAL SHIELD 16 Section I - TRIMMER ACCESSORIES BRUSH BLAD

7043324 (I.R. - 02/28/05) (Part # 7085927) 1 preliminaries Congratulations! You have just purchased one of the finest pieces of outdoor power equipment on the market today. If properly cared for, your new blower will provide years of dependable service. Please read and follow this instruction manual carefully in order to get the most out of your new equipment. As you carefully unpack your unit, you will find the following items: 1 Blower Unit 1 Handle Assembly including: 1 – Upper Handle with fo

Check the fuel system components frequently and replace any parts showing worn spots or cracks. See BATTERY SERVICE Check the battery once each month. Remove the caps and add distilled water as necessary to bring the level of the electrolyte up to about 3/32“ over plates in each cell. DO NOT FILL TO THE RINGS. Carefully reinstall battery caps. In freezing weather, charge the battery after adding water to thoroughly mix the water in the electrolyte. Keep the terminals and cables clean and tight

7078092 (I.R. - 09/14/04) Text Box: McDonough, GA 30253 USA Text Box: European Extreme Series Walk-Behind Leaf Blower Series 1 Text Box: Text Box: Text Box:

• Attach lower portion of handle assembly to engine base by aligning holes in lower handles with corresponding holes in engine base. Fasten with four 5/16-18 x 1-1/2” bolts and secure with serrated flange nuts. Tighten all handle assembly bolts securely. +1" 0 -1" 1 Assembly complete. Your unit is now ready to be started and checked for proper operation. Some minor final adjustments may be required; see the Maintenance portion of this manual. 4 unit operation STARTING THE ENGINE IMPORTANT NOTE:

(Includes Items 44 thru 54) LINE, Fuel GROMMET, Fuel Line CUP, Fuel Line FILTER ASS'Y, Fuel (Includes items 48, 49, 64, 65, 66, 68) CLIP SLEEVE, Gov CAP ASS’Y, (Includes Items 51 thru 54) CAP, Fuel GASKET HOLDER VALVE, Breather MOUNT, Fan-Wheei SCREW, M5x12mm PHCR (3) MOUNTING PLATE, Engine DAMPER,Eng.Mtg.Plate(4) PAD, Fuel Tank(4) SEAL, Eng. Mtg. Plate (3) BRACKET SWITCH, Stop SCREW FELT (2) RING SCREEN SCREW BODY, Fuel Filter ENGINE, COMPLETE(lncludes items 2 thru 42 & 61, 62, 6

3071768 (I.R. 2/4/04) 1 preliminaries Congratulations! You have just purchased one of the finest pieces of outdoor power equipment on the market today. If properly cared for, your new blower will provide years of dependable service. Please read and follow this instruction manual carefully in order to get the most out of your new equipment. As you carefully unpack your unit, you will find the following items: 1 Blower Unit 1 Handle Assembly including: 1 – Upper Handle with foam grip 2 – Lower Han

Always mention the model and serial number as found on the nameplate attached to the unit. The information in the parts section furnished with your blower is subject to change. Up-to-date parts manuals covering your blowers. For the nearest SNAPPER dealer, check the yellow pages under the heading LAWN-MOWERS. FIG. 8 - AIR CLEANER DETAIL AIR CLEANER - SERVICE EVERY 25 HOURS Every 25 hours or more frequently if operating under extremely dusty or dirty conditions, service the air cleaner as foll

• Keep hands, feet and clothing away from rotating parts. Never place your feet or hands in path of discharge. • Use proper discretion in selecting your debris removal pattern, especially on uneven terrain. Avoid steep hills, especially if surface is wet. Do not travel straight down slopes exceeding 14 degrees. If tires begin to slip when climbing a slope, the grade is too steep for safe operation. Angle the unit to a less steep slope until tires stop slipping and traction is regained. • Be keen

Be sure all safety features are attached, adjusted properly and functioning properly. • Never operate with the discharge deflectors removed or altered. • Do not change the engine governor setting or over speed the engine. • Stop on level ground, shut off engine before leaving the operator’s position for any reason. • Stop equipment and inspect impeller blades after striking objects or abnormal vibration occurs. Make necessary repairs before resuming operations. • Keep hands and feet away intake