Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
Loose clothes, jewellery or long hair can be caught in moving parts. g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 4. Power tool use and care a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any 9 ENGLISH other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. f. Use the tool in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. 5. Service a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 6. Labels on tool The label on your tool may include the following symbols: V ........... A...........AmperesHz.........HertzW...........Wattsmin........minutesVolts ........ Direct Current Read Instructions Manual n0.......... No-Load Speed ........ Class II Construction Use Eye Protection ........ Earthing Terminal ........ Safety Alert Symbol Use Ear Protection ........ Alternating Current .../min.... Revolutions or Reciprocation per minute Electrical safety This tool is double insulated; therefore no earth wire is required. Always check that the power supply corresponds to the voltage on the rating plate. WARNING: If the supply cord is damaged, it must be replaced by the manufacturer, an authorized Black & Decker Serv- ice Centre or an equally qualified person in order to avoid a hazard. If the supply cord is replaced by an equally qualified per- son, but not authorized by Black & Decker, the warranty will lose effect. ADDITIONALSAFETYINSTRUCTIONSFORBLOWERS • Do not collect still smoldering cigarette ashes, freshly cut metals shaving, screws, nails and the like. • Never block suction inlet and outlet. FEATURES This tool includes some or all of the following features. 1. Nozzle 5. Lock-On Button 2. Blast Port 6. Suction Port 3. Trigger Switch 7. Dust Bag 4. Variable Speed Knob ASSEMBLY WARNING: Before assembly, make sure that the tool is switched off and unplugged. USE MOUNTING THE NOZZLE FOR BLOWING OPERATIONS (FIG. A) • Insert the pin located inside the Nozzle into the notch provided on the Blast Port (1). • To lock Nozzle in place, turn the Nozzle in the direction indicated. • To remove Nozzle, turn the Nozzle in the opposite direction. MOUNTING THE NOZZLE AND DUST FOR DUST COLLECTION (FIG. B) • For dust collection, mount the Dust Bag at the Blast Port (2) and Nozzle at the Suction Port (6). • To remove Dust Bag and Nozzle, simply pull out by first turning in the opposite direction. • Empty the Dust Bag frequently to ensure maximum dust collecting efficiency. OPERATING THE BLOWER (FIG. C) • To switch your Blower on, depress the Switch (3). To stop your Blower, release Switch. • Adjust Variable Speed Knob (4) for different speed requirement. 10 ENGLISH • When continuous operation is required, first depress the switch and then the lock-on button (5) and release to disengage lock, squeeze and release switch. WARNING: Continuous running of machine should not exceed 30 minutes. REPLACING CARBON BRUSHES (FIG. D) • Use a screwdriver to remove the brush holder cap. • Take out the worn carbon brush, insert the new one and secure the brush hold cap. WARNING: Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark. MAINTENANCE Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning. WARNING: Before performing any maintenance, switch off and unplug the tool. • Regularly clean the ventilation slots in your tool using a soft brush or dry cloth. • Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner. PROTECTING THE ENVIRON...