Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
d) Do not refuel a running engine. e) Avoid spilling fuel or oil. Always wipe unit dry before using. f ) Move at least 10 ft. (3 meters) away from the fueling point before starting the engine. g) Always store gasoline in a container approved for flammable liquids. h) Make sure the unit is properly assembled and in good operating condition. i ) Do not use the blower near a fire, as aiming the blower in the direction of a flame may cause flammable substances to ignite. Safety Precautions English 8 BEFORE STARTING THE ENGINE • Each time before starting the engine, inspect the entire unit to see if every part is in good order and is securely tightened in place. If any damage is found in the fuel line, the exhaust line, or the ignition wiring, do not use the blower until it has been repaired. IMPORTANT Before starting operation, always make sure to check if any obstacles are left inside the volute case and net. The obstacles may cause serious injury or damage to fan and volute case. WARNING Check to see if the shock-absorbers have become cracked or otherwise damaged. Note that failing to replace these rubber and spring mounts when they have become cracked or damaged may cause the engine to come loose from its frame during use, thus resulting in possible serious bodily injury. If cracked, be sure to replace without delay. WARNING To reduce the risk of injury associated with contacting rotating parts, stop the engine before installing or removing attachments. Never take off the Guard Net . Always disconnect the spark plug before performing maintenance or accessing movable parts. USING THE PRODUCT WARNING While using the product, if abnormal noise or vibration occurs, stop the engine immediately and contact the nearest Husqvarna servicing dealer for assistance. Checking the fan is very important. If the rotating fan should break up, it might lead to serious accidents. 1. Check the work area that the blower will be used in and remove or cover all valuables that may be damaged by the air blast or thrown debris. 2. To reduce the risk of injury associated with thrown objects. a) Watch out for children, pets, open windows or freshly washed cars, and blow debris safely away. b) Use the full blower tube extension so the air stream can work close to the ground. c) Do not allow bystanders in work area. d) Do not point the blower tube in the direction of people or pets. e) Always check to be sure that no debris has been blown onto someone else’s property. f) Pay attention to the direction of the wind, do not work against the wind. 3. To minimize blowing time. a) Use rakes and brooms to loosen debris before blowing. b) In dusty conditions, slightly dampen surfaces or use a mister attachment when water is available. c) Conserve water by using power blowers instead of hoses for many lawn and garden applications, including areas such as gutters, screens, patios, grills, porches and gardens. 4. The blower must not be used while on a ladder or scaffolding. 5. Never put the machine down with the engine running unless you have it in clear sight. 6. Never touch the spark plug or plug cord while the engine is in operation. Doing so may result in being subjected to an electrical shock. 7. Never touch the muffler, spark plug, or other metallic parts of the engine, or area around the engine cover while the engine is in operation or immediately after shutting down the engine. These metallic parts reach high temperatures during operation and doing so could result in serious burns. WARNING The temperature of the machine may increase after stopping the engine. Especially never forget to cool down the engine before refueling the machine. 8. If the engine catches fire or in any other emergency situation that requires you to free yourself from the machine, open the buckle in the waist belt and drop the machine backward. 9. After using blowers and other equipment, CLEAN UP! Dispose of debris in trash receptacles. [330BT] [350BT] [370BTS] [380BTS] [330BT] [350BT] [370BTS] [380BTS] Safety Precautions English Safety Precautions MAINTENANCE 1. In order to maintain your product in proper working order, perform the maintenance and checking operations described in the manual at regular intervals. 2. Always be sure to turn off the engine and disconnect the spark plug before performing any maintenance or checking procedures. WARNING The metallic parts, engine cover, and area around the engine reach high temperatures immediately after stopping the engine. 3. Examine the blower at intervals for loose fasteners and rusted or damaged parts. Use special care around the fuel line, the muffler, and the ignition wiring. 4. All engine service except for those described in this manual should be performed by competent service personnel. Improper service to the blower fan and muffler could cause a hazardous failure. 5. When replacing the any other part or any lubricant, always be sure to use only Husqvarna products or products which ha...
Эта инструкция также подходит к моделям:Системы вентиляции - 330BT (5.39 mb)
Системы вентиляции - 350BT (5.39 mb)
Системы вентиляции - 370BTS (5.39 mb)