Оценок - 3, средний балл: 3
(
)
)
|
Фрагмент инструкции
Otherwise, loss of power and overheating can occur causing damage to unit. Refer to table for minimum wire gauge recommendations. The cord must be marked with the proper wire gauge. (Appropriate extension cords are available at Sears.) Do not use multiple cords. • In good condition. Cord insulation must be intact with no cracks or deterioration. Plug connectors must be undamaged. DO NOT use multiple cords. MINIMUM WIRE GAUGE RECOMMENDATIONS VOLTS 25 FT. 50 FT. 100 FT. * 14 _ A.W.G16 A.W.G * • American Wire Gauge Secure the extension cord to the unit by tying the cord onto the cord retainer. Insert the cord receptacle in to the recessed plug. Cord Receptacle Recessed Plug on Unit 5 KNOW YOUR ELECTRIC BLOWER READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare the illustrations to your of the various controls and adjustments. ON/OFF _ Top Handle Cord _-=_ '/_-_ -° Retainer _=""_"_. _"" Air Inlet ON/OFF SWITCH The ON/OFF SWITCH is used to activate the motor. STOPPING YOUR UNIT Slide the ON/OFF switch to the OFF position to stop the unit. STARTING YOUR UNIT Slide the ON/OFF switch to the ON position to turn on the unit. _kWARNING: Do not use the unit without the blower tubes properly attached to avoid flying debris and/or im peller contact which can cause serious in ury. Always wear eye protection to prevent rocks or debr s from be ng blown or ricocheting into the eyes and face which can result in blindness or serious injury. OPERATING POSITION BLOWER unit to familiarize yourself with the location Save this manual for future reference. ,o er Tu e ozz,e BLOWER TUBE AND NOZZLE The BLOWER TUBE and NOZZLE are designed to direct the flow of air. _JbWARNING: Inspect the area be fore using the unit. Remove all debris and hard objects such as rocks, glass, wire, etc., that can ricochet, be thrown, or otherwise cause injury or damage during operation. Use your unit as a blower for: • Sweeping debris or grass clippings from driveways, sidewalks, patios, etc. • Blowing grass clippings, straw, or leaves into piles, or removing debris from corners, around joints, or between bricks. Direct air flow by directing the blower tube/nozzle down or to one side. Always work away from solid objects such as walks, large stones, vehicles, and fences. Clean corners by starting in corners and moving outward. This will help prevent an accumulation of debris which could fly into your face. Be careful when working near plants. The force of the air could damage tender plants. 6 CUSTOMER RESPONSIBILITIES CARE & MAINTENANCE TASK Check for loose fasteners and parts Check for damaged or worn parts Inspect and clean unit and labels GENERAL RECOMMENDATIONS The warranty on this unit does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must maintain unit as instructed in this manual. Various adjustments will need to be made periodically to properly maintain your unit. BEFORE EACH USE CHECKFORLOOSE FASTENERS AND PARTS • BlowerTube • Nozzle WHEN TO PERFORM Before each use Before each use After each use CHECK FOR DAMAGED OR WORN PARTS Contact Sears Service Center for replacement of damaged or worn parts. • ON/OFFSwitch -Ensure switch functions properly by moving the switch to the OFF position. Make sure motor stops; then restart motor and continue. AFTER EACH USE INSPECT AND CLEAN UNIT & LABELS Stop unit and unplug extension cord. • Inspect complete unit for loose or damaged parts. Clean the unit using a damp cloth with a mild detergent. • Wipe off unit with a clean dry cloth. USER REPLACEABLE SERVICE PARTS REPLACEMENT PART PART NUMBER Blower Tube and Nozzle 530403682 Gutter Kit 71-79970 Safety Glasses 71-85707 Extension Cord 71-85709 d_WARNING: Perform the following steps after each use: • Stop unit and disconnect from the power source. • Store the unit in a stable location. • Store unit with all guards in place. Position unit so that any sharp object cannot accidentally cause in ury. • Store unit well out of the reach of children. Prepare unit for storage at the end of the season or if it will not be used for 30 days or more. BLOWER STORAGE • Disconnect from the power source. • Clean the entire unit. • Inspect the blower and all tubes. • Clean air vents and air inlet of debris. • Store your unit and extension cord in a well ventilated area and covered, if possible, to prevent dust and dirt accumulation. Do not cover with plastic. Plastic cannot breathe and may cause condensation and eventual rust or corrosion. • Check entire unit for loose screws. Replace any damaged, worn, or broken parts. 7 TROUBLESHOOTING TABLE _k WARNING: Always stop unit and disconnect from the power source before performing all of the recommended remedies below except remedies that re quire the unit to be operating. SYMPTOM CAUSE REMEDY Unit fails to 1. Switch in the OFF position. 1. Slide switch to ON position, operate, 2. Extension cord disconnected. 2. Reconnect exten...
Эта инструкция также подходит к моделям:Системы вентиляции - 358.799341 (637.12 kb)