Войти:
Оценок - 4, средний балл: 3.5 ( )

Инструкция по эксплуатации Craftsman, модель 280030785

Производитель: Craftsman
Размер: 1.36 mb
Название файла:
Язык инструкции:enes
Перейти к скачиванию



Фрагмент инструкции


if it still does not fit, contact a qualified electrician to install the proper outlet Do not change the appliance or extension cord plug in any way.. Use only an extension cord recommended for outdoor use. _, WARNING: If you do not fully seat the extension cord on the inlet plug, or if the plug and cord do not fit firmly, the loose plug could lead to overheating and cause a fire, possibly burning you or others. Ensure that you fully seat the cord on the plug. Check the connection regularly to ensure that the cord is firmly attached. Do not use a worn-out or loose extension cord. ExtensionCord Minimum Wire Length Gage (AoWoG.) 100 ft 14 !50 ft I2 Note: Do not use an extension cord over 150 feet. Important: Check the extension cord frequently during use for holes in the insulation. Do not use a damaged cord. Do not run the cord through standing water or wet grass.. Connect the extension cord to the blower as shown. I2 Sta_inglStopping/A_ustingthe Air Speed Rotatethe knobtoturn on, off, ora_ustair speed.. I C3 =--_ 2 o _ C3I! t. High 2. LOW 3. Off speed speed Using the Concentrator Nozzle Accessory lnstall the concentrator nozzle into the blower tube to help reach into narrow spaces or to remove matted debris from hard surfaces. Remove the concentrator nozzle when finished Using the Blower The blower is intended for residential use only, Use the blower outdoors to move debris as needed A WARNING: The blower can throw debris, possibly causing serious personal injury to the operator or bystanders. " Do not blow hard objects such as nails, bolts, or rocks.. Do not operate the blower near bystanders or pets Use extra care when cleaning debris from stairs or other tight areas Wear safety goggles or other suitable eye protection, long pants, and shoes.. Using the Vacuum _, WARNING: The vacuum can throw debris, possibly causing serious personal injury to the operator or bystanders. = Do not operate the vacuum without the bag installed or with the bag zipper open.. • Do not vacuum sharp, pointed, or hard objects that could be thrown through thefabricofthebag,suchaswires, staples,nails,orrocks Important:Vacuumandsoft onlyleaves items.Harditemssuchassticks,rocks, acorns,andpineconeswilldamagethe impeller Important:Donotforcethevacuumtube intoapileofdebrisorholdthetubeupright whileforcefeedingdebrisintothetube. Eitheractionmaycloganddamagethe impellerIfthevacuumstartstovibrateor makeabnormalstopit,unplugthe noise, cord,andcheckforthecause, EmptyingtheBag 1. 2. • Turn off and unplug the vacuum from the power source.. Unzip and empty any debris from the bag. _ _._ _, Do not store debris in the bag., To clean the bag, turn it inside out and shake out any excess debris, Once a year, hand wash the bag in soapy water and allow it to air dry _t, DANGER: Normal usage of the bag causes it to wear and deteriorate over time, A worn or deteriorated bag allows small objects to be thrown through the bag, possibly injuring the operator or bystanders° Check the bag frequently. If it is worn or deteriorated, replace it with a genuine Craftsman vacuum bag; refer to the Replaceable Parts List. Double*insulated Appliances tn a double-insulated appliance, two systems of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added to the appliance Servicing a double-insulated appliance requires extreme care and knowledge of the system, and should be done only by the qualified service personnel at your Sears Service Center (refer to the back cover). Replacement parts for a double-insulated appliance must be identical to the parts they replace. A double-insulated appliance is marked with the words "Double Insulation" or "Double Insulated.." The symbol (square within a square) [] may also be marked on the appliance. Removing Clogged Debris from the Impeller I., Turn off and unplug the vacuum from the power source and wait for all moving parts to stop., 7 2 Remove the vacuum tube assembly., 3 Remove the debris from impeller Mades.. 4 Check the impeller for any signs of damager If it is damaged, contact your Sear Service Center (refer to the back cover). 5_ Install the vacuum tube or, if you want to switch to blower mode, the bottom inlet cover, Refer to Converting from Blower to Vacuum or Converting from Vacuum to Blower for more information. Store the blowedvacuum and extension cord indoors, in a cool dry location, out of reach of children and animals.. Problem Possible Cause Corrective Action Appliance does not t Switch is in the Off 1,, Turn the switch to On, operate., position.. 2 The inlet cover or vac 2., Ensure that the bottom tube is not locked in inlet cover or vacuum place.. tube is locked in place, 3. The power cord is 3, Ensure that the disconnected, extension cord is fully connected to the blower and the power supply, 4.. Mechanical failure 4, Contact Sears Service (see back cover), Appliance vibrates 1. Debris is caught in the Turn off the ap...

Эта инструкция также подходит к моделям:
Системы вентиляции - 136.748270 (1.36 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории