Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
THE SPECIFIC MODELS THAT THIS BOOK COVERS ARE CONTAINED ON THE INSIDE COVER. BEFORE OPERATING YOUR MACHINE, PLEASE READ ALL THE INFORMATION ENCLOSED. OPERATOR’S MANUAL OPERATOR’S PART NUMBER 03181 WARNING WARNING FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN SERIOUS INJURY. * Keep all safety shields in place. * Before performing any maintenance or service, stop the machine and remove the spark plug wire. * If a mechanism becomes clogged, stop the engine and wait for all moving parts to come to a complete halt before cleaning. * Keep hands, feet and clothing away from power-driven parts. * Read this manual completely as well as the Operator's Manual that came with your mower. * Keep others off the tractor (only one person at a time). REMEMBER - YOUR MOWER IS ONLY AS SAFE AS THE OPERATOR! Hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper training of the personnel involved in the operation, transport, maintenance, and storage of the equipment. This manual covers the operating instructions and illustrated parts list for: GC-STT-52V with a serial number of B8600001 to B8699999 GC-STT-61V with a serial number of B8800001 to B8899999 1 1.1 INTRODUCTION This manual has been prepared to provide the information you need to correctly assemble, operate, and maintain this grass catcher. Read it carefully and keep it for future reference. The replacement of any part on this product by other than the manufacturer's authorized replacement part may adversely affect the performance, durability or safety of this product. USE OF OTHER THAN ORIGINAL SCAG REPLACEMENT PARTS WILL VOID THE WARRANTY. If additional information or service is needed that is not outlined in this manual, please contact your Scag Power Equipment dealer. Scag dealers are trained in the latest service methods and carry a full line of Scag replacement parts. When ordering parts, always provide the complete model number of your catcher. All information provided in this manual is based upon information available at the time of printing. Scag Power Equipment reserves the right to make changes at any time without notice or obligation. A replacement manual is available from your authorized Scag Service Dealer or by contacting: Scag Power Equipment, Service Department at P.O. Box 152, Mayville, WI 53050. You may also contact us through our website at The manual for this grass catcher can be downloaded by using the model and serial number or use the contact form to make your request. Please indicate the complete model and serial number of your Scag product when requesting replacement manuals. 1.2 DIRECTION REFERENCE The "Right" and "Left", "Front" and "Rear" of the machine are referenced from the normal operating position. 2. Before removing the grass bags, disengage the mower, stop the engine and wait for all movement to stop. 3. ALWAYS turn the engine OFF, remove the key and wait for all movement to stop before servicing or cleaning the mower or the grass catcher. 4. Do not modify or alter any component of the grass catcher attachment or mower. 5. Do not allow any passengers to ride on the grass catcher attachment or on the mower. WARNING DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING KIT, OR ENTIRE GRASS CATCHER INSTALLED 2.1 SAFETY AND OPERATING INSTRUCTIONS -NOTETo avoid personal injury, it is imperative that all safety instructions be observed. 1. Read this operator's manual and the operator's manual that is supplied with the machine this attachment is used on. DANGER ROTATING BLOWER BLADES STOP ENGINE BEFORE ENTERING CHUTE CONTACT CAN INJURE 3.1 ASSEMBLY INSTRUCTIONS -NOTE- Use the illustrated parts list as a part number reference when following the assembly instructions. 1. Remove all packaging materials. Lay out the mounting hardware and the catcher assembly parts for easy access. Prepare the work area making sure that it is a clean, safe environment. 2. Remove the discharge chute from the cutter deck. See Figure 3-1. INSTALL PULLEY ON RH SPINDLE SHAFT - ON TOP OF EXISTING SPINDLE DRIVE REMOVE DISCHARGE REMOVE EXISTING PULLEY CHUTE AND RT. SIDE BELT HARDWARE COVER REMOVE (2) U-NUTS RIGHT SIDE OF 52" CUTTER DECK SHOWN (Note: Some parts not shown for viewing purposes.) FIGURE 3-1 -NOTE- Do not discard the discharge chute or mounting hardware. The discharge chute MUST be reinstalled anytime the grass catcher has been removed from the machine. WARNINGWARNING DO NOT OPERATE WITHOUT DISCHARGE CHUTE, MULCHING KIT, OR ENTIRE GRASS CATCHER INSTALLED 3. Remove the right side belt cover to gain access to the spindle assembly. Remove the u-nuts from the cutter deck bracket. See Figure 3-1. 4. Install the grass catcher pulley onto the spindle assembly. Apply loctite to both pulley setscrews and tighten. See Figure 3-1. 5. Remove the "Custom-Cut" and "Turbo" baffles from the cutter deck. Using the original hardware, install the new "Front" and "Turbo" baffles. See Figure 3-2. Front Baffle 52V...