Оценок - 5, средний балл: 4
(
)
)
|
Фрагмент инструкции
Moving the deflector to the lower hole allows for a greater volume of air to be directed upward. To reduce windrowing or to blow over an obstacle, point deflector upward. Slight changes in deflector position will have a big effect on air flow. Experiment until you find the best position for your needs. For best performance, be sure engine recoil starter assembly, the blower intake and outlet areas are always kept clear and free of leaves or other debris. Maintenance Instructions Keep all nuts, bolts, and screws tight. Never store the blower with fuel in its fuel tank inside a building or in a confined space where fumes may reach an open flame or sparks. Always refer to the instruction manual for important details if the product is to be stored for an extended period. Engine - 4 cycle. (Refer to engine manufacturer’s operating instructions for fuel recommendations and additional information.) Tires - Tubeless. Inflate to air pressure of 30 P.S.I. Labels should be inspected before each use. Replace damaged labels immediately. Check oil level regularly Be sure correct oil level is maintained. Check oil level after every 5 hours of operation, or daily, before starting engine. Use SAE 30 oil. Change oil after first 5 hours of operation. Remove drain plug and drain oil while engine is warm. Replace drain plug. Remove oil fill plug and refill with new oil. Start and run engine at idle for 30 seconds. Stop engine. Wait 30 seconds and re-check oil level. If required, add oil to overflowing at oil fill plug. TO PREVENT ACCIDENTAL STARTING, REMOVE SPARK PLUG WIRE WHEN SERVICING ENGINE OR EQUIPMENT. TORQUE SPECIFICATIONS Location Description P/N Min. Torque Ft-lbs (In-lbs) Max. Torque Ft-lbs (In-lbs) Housing to engine face BLT-W LF 5/16-24 x 1-3/8 910517 22 (264) 28 (336) Deck to housing NUT 5/16-18 64141-6 16 (192) 22 (276) Engine to deck BLT 5/16-18 X 1-1/2 64262-009 19 (228) 25 (300) Lower handle to deck BLT 5/16-18 X 1-3/4 64123-61 19 (228) 25 (300) Upper handle to lower handle BLT 5/16-18 X 1-3/4 64123-61 19 (228) 25 (300) Brace to Lower Handle BLT 5/16-18 X 2 64123-56 19 (228) 25 (300) Thrrotle to handle BLT 1/4-20 X 1-3/4 90-0414 4 (48) 6 (72) Interior deflector to hook BLT-W LF 10-32 X 5/8 64139-26 (52) (71) Fan to Crankshaft BLT3/8-24 X 2.0 GR8 64123-126 30 50 Front panel to housing (short stud) NUT 5/16-18 64141-6 16 (192) 22 (276) Intake guard clamp (long stud) NUT-NYLOC 5/16-18 64229-02 8 (100) Wheel bracket to housing NUT-FL 5/16-18 64141-6 16 (192) 22 (276) Front wheel axle bolt BLT 3/8-16 X 5-1/2 GR5 64123-252 34 45 OPTIMAX BLOWER ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY 11 INTAKE GUARD ASSY FIGURE 1 1-1 910648 LABEL-INTAKE GUARD 1 1-2 64229-02 LOCKNUT-NYL 5/16-18 3 1-3 911130 CLAMP-INTAKE GUARD 3 1-4 921101.7 ASSY-INTAKE GUARD 1 1-5 64141-6 NUT 5/16-18 3 1-6 921121.10 FRONT PANEL 1 1-7 64123-126 BLT-HEX 3/8-24X2.0 GR8 1 1-8 910230 FAN-13HP 1 1-9 64164-13 KEY, 1/4X1/4X2 1 1-10 910527 WASHER,HUB 13HP 1 OPTIMAX BLOWER 12 ENGINE ASSY FIGURE 2 ITEM PART NO. DESCRIPTION QTY ITEM PART NO. DESCRIPTION QTY 2-1 64229-02 LOCKNUT-NYL 5/16-18 10 2-2 64141-6 NUT 5/16-18 4 2-3 910912 ENGINE-13HP HONDA 1 2-4 946 CLIP-THROTTLE 1 2-5 4164159-01 CABLE-THROTTLE 1 2-6 900300 HANDLE-UPPER 1 (INCLUDES 2 900303) 2-7 900303 GRIP 2 2-8 90-0414 BLT-1/4-20 X 1-3/4 1 2-9 64123-56 BLT-HEX 5/16-18X2 2 2-10 64151-8 LOCKNUT-1/4-20 2-WAY 1 2-11 4164204 WHEEL 2 2-12 64144-36 SNAP RING.625 2 2-13 4164192-01 SPACER-PDR MTL 35X1.0X.25 2 2-14 4164178 AXLE 1 2-15 916-2.10 HANDLE-LOWER 2 2-16 64163-55 WASHER-5/16 FLAT 16 2-17 920070.7 DECK-13HP RT 1 2-18 920068.7 DECK-13HP LFT 1 2-19 64123-61 BLT-HEX 5/16-18X1-3/4 8 2-20 4164204-01 BEARING-WHL 4 2-21 64268-02 NUT-FL NYLON LOCK 5/16-18 4 2-22 64262-009 BLT-FLGHD 5/16-18X1-1/2 4 2-23 4164185.10 BRACE-BLOWER, ENG 1 HOUSING ASSEMBLY FIGURE 3 3-1 64141-6 NUT 5/16-18 3 3-2 4164207 HOUSING-13HP 1 3-3 4164197 LABEL-LW HOUSING 13HP 1 3-4 910609 LABEL-WARNING 1 3-5 910517 BLT-WLF 5/16-24 X 1-3/8 4 3-6 64151-31 LOCKNUT-10-32 7 3-7 910130 SPRING-DEFLECTOR 1 3-8 8-18 RING-RETAINING 3 3-9 910131 KNOB 1 3-10 64002-04 LOCKWASHER-5/16 1 3-11 910121.10 DEFLECTOR-SIDE 1 3-12 64139-26 BLT-WLF 10-32 X 5/8 2 3-13 910123.10 DEFLECTOR-INT 1 3-14 910132 HANDLE-DEFLECTOR 1 3-15 64151-18 LOCKNUT-3/8-16 2-WAY 1 3-16 64123-252 BLT-HEX 3/8-16 X 5-1/2 1 3-17 910403.10 BRKT-FRT WHL 1 3-18 4164205 WHEEL-PNEUMATIC 1 3-19 900404 SLEEVE-WHEEL 1 3-20 900405 SPACER-FRT WHL BRKT 2 3-21 4164204-01 BRG-PNEUMATIC WHL 2 3-22 64152-68 SCREW 10-32X5-1/2 HH 5 3-23 910134 SPACER-ENG HOUSING 5 year limited service & warranty policy for gasoline powered MAXIMUM output blowers All Little Wonder Gasoline Powered Maximum Output blowers are guaranteed against defects in material and workmanship for a period of FIVE YEARS from date of purchase, when used for RESIDENTIAL SERVICE, or COMMERCIAL SERVICE. Any Little Wonder Gasoline powered Maximum Output Blower or part found to be defective within the warranty period is to be retur...
Эта инструкция также подходит к моделям:Системы вентиляции - OPTIMAX 9131-00-01 (1.7 mb)