Оценок - 6, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
– All operators and mechanics should be trained. The owner is responsible for training the users. – Wear appropriate clothing, including safety goggles or safety glasses with side shields when operating. Wear substantial footwear. Do not operate barefoot or wearing open sandals. Long hair, loose clothing or jewelry may get tangled in moving parts. – Wear appropriate hearing protection. _ Wear dust mask to avoid breathing dust. – Wear safety glasses. – Never allow children, unskilled or improperly trained people to operate this equipment. Local regulations can restrict the age of the operator. – Keep warning labels and this operator's manual legible and intact. Replacement labels and manuals are available from the factory. – Do not operate machine while under the influence of drugs or alcohol, or any other condition of impairment. – The owner/user can prevent and is responsible for accidents or injuries occurring to themselves, other people or property. SITE PREPARATION AND CIRCUMSTANCES – Evaluate the terrain to determine how to safely perform the job. Only use accessories and attachments approved by the manufacturer. – Be sure the area is clear of pets and people, especially young children. Never assume they will remain where you last saw them. Stop the machine if any enter the area. MULTIPLE OPERATORS – Keep a safe distance between operators when working together. MACHINE PREPARATION – Do not tamper with or defeat safety devices. Keep guards, shields and interlock safety devices in place and in proper working condition. They are for your protection. – Keep all fasteners such as nuts, bolts and pins well secured. – Verify that machine and attachments, if any, are in good operating condition. OPERATING SAFELY IN GENERAL – Use extra care when loading or unloading the machine into a trailer or truck. – Do not run the engine in an enclosed area where dangerous carbon monoxide fumes can collect. – Never leave a running machine unattended. Always stop engine when leaving the operator position. – Do not blow towards people, cars, windows, or other items which could be injured or damaged by the blown debris. – Keep hands away from the blower air intake and outlet. STARTING – Start according to instructions in this manual or on the machine. – Do not change engine governor settings or overspeed the engine. Operating the engine at excessive speed can increase the hazard of personal injury. INTERRUPTING OPERATION - Before leaving the operator's position: - Park on level ground. - Shut off the engine. - Stop the engine, and wait until the fan stops moving: - before refueling; - Stop the engine, and disconnect the spark plug wire(s): - before clearing blockages; - before checking, cleaning or working on the machine; - if the machine begins to vibrate abnormally: shut off machine immediately. Inspect and have repairs made as needed before restarting; - except for repairs or adjustments as specifically noted, such as for carburetor adjustment, where the engine must be running. Keep hands and feet clear of moving parts in these circumstances. - Allow the fan to come to a complete stop when stopping operation to clear blockages, unclog, inspect the machine, do maintenance or repair. - Reduce the throttle setting during engine shut- down and, if the engine is provided with a shut- off valve, turn the fuel off at the conclusion of operation. OPERATING ON SLOPES USE EXTRA CARE WHEN OPERATING ON SLOPES. EVALUATE THE RISKS INVOLVED BEFORE OPERATING ON A SLOPE . - Slopes are a major factor related to slip and fall accidents that sometimes lead to severe injury or death. All slopes require extra caution. - Do not operate on slopes if uneasy or uncertain. Ultimate responsibility for safe operation on slopes rests with the operator. - Do not operate on steep slopes. Poor footing could cause a slip and fall accident. - Keep all movement on slopes slow and gradual. - Do not operate near drop-offs, ditches or embankments. You could lose your footing or balance. - Do not turn on slopes unless necessary, and then turn slowly and downhill when possible. - Be sure of your footing on slopes. - Watch for holes, ruts, bumps, rocks and other hidden objects. Uneven terrain could cause a slip and fall accident. Tall grass can hide objects. MAINTENANCE SAFETY In general - Maintain machine according to manufacturer's schedule and instructions for maximum safety and best results. - Park machine on level ground. - Never allow untrained personnel to service machine. - Guards should only be removed by a qualified technician for maintenance or service. - Adjust or repair only after the engine has been stopped and the fan has stopped moving. - Disconnect spark plug wire(s) before doing any maintenance. - Replace parts if worn, damaged or faulty. For best results, always replace with parts recommended by the manufacturer. - Do not dismantle the machine without releasing or restraining forces which may cause parts to move suddenly. - Provide adequate supp...
Эта инструкция также подходит к моделям:Системы вентиляции - OPTIMAX 91270-03-01 (1.29 mb)
Системы вентиляции - OPTIMAX 2/1/1960 (1.29 mb)
Системы вентиляции - OPTIMAX 91270-03-01 (1.29 mb)