Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Before use of this product, familiarize yourself with all operating features and safety rules. BLOWER TUBE AND NOZZLE The blower tube and nozzle can be assembled and installed on the blower without using any tools. THROTTLE/CRUISE CONTROL LEVER The throttle/cruise control lever feature allows the user to operate the blower without holding the throttle trigger. To slow the engine, simply push the throttle/cruise control lever forward. ENGINE The blower has a powerful 30cc engine with sufficient power to handle tough blowing and vacuuming jobs. QUICK START™ The Quick Start allows for easier and quicker starting. SWEEPER NOZZLE The sweeper nozzle allows for more area to be covered during blower operation. THROTTLE TRIGGER The blower can be operated at any speed between idle and full throttle. ASSEMBLY UNPACKING This product requires assembly. . Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. WARNING: Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury. . Inspect the product carefully to make sure no breakage or damage occurred during shipping. . Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. . If any parts are damaged or missing, please call 1-800-860-4050 for assistance. PACKING LIST Blower Upper Blower Tube Sweeper Nozzle 4-Cycle Engine Lubricant Funnel Operator’s Manual NOTE: Read and remove all hang tags and store with your Operator’s Manual. WARNING: If any parts are damaged or missing do not operate this product until the parts are replaced. Use of the product with damaged or missing parts could result in possible serious personal injury. WARNING: Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. WARNING: To prevent accidental starting that could cause serious personal injury, always disconnect the engine spark plug wire from the spark plug when assembling parts. WARNING: This product is intended for blower use only and is not designed for vacuum use. Do not attempt to open the air inlet cover that covers the impeller. Opening the air inlet cover could result in contact with the impeller blades and cause serious personal injuries. ASSEMBLING THE BLOWER TUBES See Figures 2 - 3. . Align raised tabs on blower housing outlet to the slots on upper tube; slide together and tighten securely by twisting. Check tightness after initial use and retighten if needed. . Attach sweeper nozzle to upper blower tube by aligning raised tabs on upper blower tube; slide together and tighten securely by twisting. Check tightness after initial use and retighten if needed. . To remove the tubes, rotate the tubes to unlock them and remove from the blower housing outlet. OPERATION WARNING: Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. WARNING: Always wear eye protection with side shields marked to comply with ANSI Z87.1, along with hearing protection. Failure to do so could result in objects being thrown into your eyes and other possible serious injuries. WARNING: Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury. APPLICATIONS You may use this product for the purposes listed below: . Clearing leaves and other debris from your lawn . Keeping decks and driveways free from leaves and pine needles WARNING: Gasoline and its vapors are highly flammable and explosive. To prevent serious personal injury and property damage, handle it with care. Keep away from ignition sources and open flames, handle outdoors only, do not smoke while mixing gasoline and lubricant together; and wipe up spills immediately. FILLING THE TANK . Clean the surface around the fuel cap to prevent contamination. . Loosen the fuel cap slowly by turning counterclockwise. . Pour the fuel carefully into the tank. . Clean and inspect the fuel cap gasket before replacing the fuel cap. . Replace the fuel cap and tighten it by turning it clockwise. . Wipe spilled fuel from the product. . Move at least 30 ft. away from refueling area before starting the product. NOTE: It is normal for smoke to be emitted from a new engine during first use. WARNING: Always shut off engine before fueling. Never add fuel to a machine with a running or hot engine. Move at least 30 ft. from refueling site before starting engine. Do not smoke and stay away from open flam...