Оценок - 0, средний балл: 5
(
)
)
|
Фрагмент инструкции
. Do not smoke while handling fuel. • Mix and store fuel in a container approved for gasoline. • Mix fuel outdoors where there are no sparks or flames. • Loosen fuel cap slowly to release pressure and to keep fuel from escaping around the cap. • Tighten the fuel cap securely after refueling. • Wipe spilled fuel from the unit. Move 30 feet away from refueling site before starting engine. • Never attempt to burn off spilled fuel under any circumstances. • To reduce the risk of fire and burn injury, handle fuel with care. It is highly flammable. . If fuel is spilled, do not attempt to start the engine but move the machine away from the area of spillage and avoid creating any source of ignition until fuel vapors have dissipated. . Replace all fuel tank and container caps securely. • Empty fuel tank and restrain the unit from moving before transporting in a vehicle. . When draining the fuel tank, use an approved fuel storage container in a well-ventilated area. • Select bare ground, stop engine, and allow to cool before refueling. • Save these instructions. Refer to them frequently and use them to instruct others who may use this tool. If you loan someone this tool, loan them these instructions also. 4 SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME EXPLANATION Safety Alert Symbol Read the Operator’s Manual Wear Eye and Hearing Protection Vacuum Door Long Hair Loose Clothing Gasoline and Lubricant Precautions that involve your safety. To reduce the risk of injury, user must read and understand operator’s manual before using this product. Wear eye protection which is marked to comply with ANSI Z87.1 as well as hearing protection when operating this equipment. Do not run unit while vacuum door is unsecured. Risk of long hair being drawn into air inlet. Risk of loose clothing being drawn into air intake. Use unleaded gasoline intended for motor vehicle use with an octane rating of 87 [(R + M) / ] or higher. This product is powered by a -cycle engine and requires pre-mixing gasoline and -cycle lubricant. 5 SYMBOLS The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. CAUTION: (Without Safety Alert Symbol) Indicates a situation that may result in property damage. SERVICE Servicing requires extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to your nearest AUTHORIZED SERVICE CENTER for repair. When servicing, use only identical replacement parts. WARNING: To avoid serious personal injury, do not attempt to use this product until you read thoroughly and understand completely the operator’s manual. If you do not understand the warnings and instructions in the operator’s manual, do not use this product. Call Ryobi customer service for assistance. WARNING: The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and, when needed, a full face shield. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1. SAVE THESE INSTRUCTIONS 6 FEATURES PRODUCT SPECIFICATIONS Engine Displacement....................................................................................................................................................25.4cc Air Velocity: MPH...................................................................................................................................205 (with high velocity nozzle) CFM......................................................................................................................................................... 375 (at housing) Weight........................................................................................................................................................................ 10.4 lbs. Fig. 1a primer bulb choke LEVER STARTER GRIP UPPER VACUUM TUBE VACUUM BAG LOWER VACUUM TUBE SHOULDER STRAP va cuum TUBE screw va cuum handle upper handle CRUisE CONTROL THROTTLE TRIGGER ON/OFF SWITCH FUEL CAP KNOW YOUR Blower/vacuum See Figures 1a - 1b. The safe use of this product requires an understanding of the information on the tool and in this operator’s manual as well as a knowledge of the projec...
Эта инструкция также подходит к моделям:Системы вентиляции - RY09907 (3.38 mb)